Part Number: TPS7A54-Q1 Other Parts Discussed in Thread: TPS7A54EVM-006 Hi
I am trying to do Average modelling for the IC, Looking at the parameters in the datasheet, I was able to find Line and Load Regulation data from which, I could approximate open…
Part Number: TPS74801-Q1 Other Parts Discussed in Thread: TPS7A54-Q1 Hi,
We are planning to use the TPS74801-Q1 or TPS7A54-Q1 for our application. Need suggestion which part is best for our need and support from TI:
1. Vout= 1.24V, Iout= 0.3A , Vin= 1…
Part Number: TPS7A54-Q1 Other Parts Discussed in Thread: TPS7A54EVM-006 Please clarify the connection of the Bias pin when not used (Vin = 5.5V, Vo = 5V)
The Pin table states that "A 10uF capacitor or larger must be connected between this pin and ground…
Part Number: TPS7A54-Q1 Other Parts Discussed in Thread: CDCI6214 , Hi,
Our team recently created a board where we need to supply power to a CDCI6214, and this device requires a voltage supply ramp time faster than 3 ms. We have chosen to use the TPS7A54…
Part Number: TPS7A47 Other Parts Discussed in Thread: TIDA-01371 , TPS7A54 , TPS7A85 Hi,
I would like to ask you some questions about TPS7A47 with TIDA-01371 as below.
TIDA-01371 Programmable ±100-V, High-Current, Floating Linear Regulator Reference Design…
Hi Vikas,
There is no document like this for the TPS7A54-Q1. All information is contained within the datasheet.
Thanks,
Stephen
Linear and Low Dropout Regulators
Thanks,
I am planning to use TPS7A54-Q1 LDO for the supply rail 2.5V have current 86mA, Please suggest or is there any other recommendation.
Also is there any start up ramp time requirement for this rail ??
Regards,
Vikas G.
