Part Number: TPS7A56 As shown in the figure, there is a significant difference in the thermal resistance parameters for the TPS7A56 between the EVM-based values and those based on the JEDEC standard. Please provide all the thermal resistance coefficients…
Part Number: TPS7A56 hi
we design : vin=1.2v ,vout=0.9v ,iout(max)=4a ,rapple=2mv
1 cp_en=0, We supply Vbias via the voltage division of 12V . Is this voltage division scheme acceptable? What is the overall Vbias current? please see the pciture. …
Part Number: TPS7A56 hi
we use the tps7a56 to design 1.2v to 0.9v.
1 we only have 12v not 11v in my board . can we get 11v from 12v by R division ?
2 PG is valid ,when the V bias is ok ?or VIN is ok? cp=high
Part Number: TPS7A56 Other Parts Discussed in Thread: TPS7A57-Q1 , TPS7N59 , , TPS7A57 Hi,
The 5V to 3.3V using TPS7A5601RTER. Would you please take a look at the attached schematic and let me know why there is no output (3.3V) voltage when 5V applied…
Part Number: TPS7A56 What does the .A suffix mean in this part number TPS7A5601RTER.A?
What is the difference between these two parts in the datasheet?
TPS7A5601RTER
TPS7A5601RTER.A
Best,
Nate
Part Number: TPS7A56 Hi team,
In the following application diagram for the TPS7A56, the EN pin has an absolute maximum rating of 6.5 V, so connecting it to an 11 V input seems problematic. Is this a mistake in the documentation?
Best regards,
…
Part Number: TPS7A56 LDO team,
Our customer is considering TPS7A56 to create a low noise voltage rail.
Requirements:
Vin 5.2V
Vout 5.1V
Iout 6A
If they had to increase Vin to 5.3V to allow for the dropout, this is possible, but would also…
