Part Number: TPS7A91EVM-831 Other Parts Discussed in Thread: TPS7A92 , TPS7A91 , The TI website for the TPS7A92 shows the TPS7A91EVM-831 for evaluating that part. But the evaluation board has the TPS7A91, not the TPS7A92. So we can't evaluate currents higher…
Part Number: TPS7A91EVM-831 Other Parts Discussed in Thread: TPS7A91 , Hello all,
Regarding the TPS7A91 LDO:
According to the product's PDF, the minimum Cin/Cout is 10uF (page 4, section 6.3)
According to the TPS7A91 Evaluation board (TPS7A91EVM-831…
Hi Divya,
The only simulation models that we have available can be found under the Tools & software tab of the product folder: www.ti.com/.../toolssoftware
Likely the best method for you to understand the inrush current for your application is to…
Part Number: TPS7A90 Other Parts Discussed in Thread: TPS7A91 , Hello Team,
my customer wanted to test TPS7A90, but we only have EVM for TPS7A91:
www.ti.com/.../tps7a91evm-831
Is there any way to get this EVM with TPS7A90?
thanks and regards
Adrian
Hi Vara,
You can use the LMP92018EVM with another LDO EVM board, just as the TPS7A91EVM to build a prototype of this application. The TPS7A91 features a feedback pin.
www.ti.com/.../tps7a91evm-831
Thanks!
Paul
Hi Yurie,
TPS7A91 and TPS7A92 are from the same family of devices and share the same layout. The difference between the devices is the rated current. At this time we do not have a dedicated EVM that comes prepopulated with TPS7A92. If you would like…
Part Number: TPS7A92 Other Parts Discussed in Thread: TPS7A91 , TPS7A91EVM-831 Hello LDO TEAM
When I use LDO TPS7A92 ,input voltage 5V and output voltage is 3.3V.
The input capcitor is one 10uF/25V MLCC in parallel with one 220uF/16V AL CAP.
While output…
