Part Number: TPS7B4250-Q1 Other Parts Discussed in Thread: TL431 , Hi Team,
Could you please help to check if we have an LDO which don' have tracking function which is similar with TPS7B4250-Q1 could support reverse current, reverse voltage and short to…
Part Number: TPS7B4250-Q1 Hi team,
One question about the voltage rating selection of output capacitor.
Considering the short to battery case would happen and battery voltage range is about 9V~16V, so what is your recommendation for the voltage rating…
Part Number: TPS7B4250-Q1 I wonder is there any problem on TPS7B4250 pspice model.
Since I have been not able to see dropout voltage point of this product.
Could you please help me?
From datasheet of TPS7B4250, the definition of Vdrop is
Vdrop = Vi …
Part Number: TPS7B4250-Q1 Hi team,
Is output current clamped to "Output current limitation IOUT(LIM) " if short circuit condition? In this case, does I OUT(LIM) continue to flow until its thermal shutdown?
Regards, Ochi
Part Number: TPS7B4250-Q1 Other Parts Discussed in Thread: TPS7B4254-Q1 , TPS7B4253-Q1 , Hi,
I have looked for this device part number on several vendor sites (Digi-key, Mouser, Newark), and unfortunately have seen that this part is out of stock with an…
Part Number: TPS7B4250-Q1 Hello Team, I have a question. Can TPS7B4250-Q1 use as usual LDO? It means ADJ/EN-pin is able to use as feebback-pin of usual LDO. (Of course, The external voltage divider is required.) I looked at the datasheet it seems reference…
Part Number: TPS7B4250-Q1 Figure 11 of the data sheet seems to indicate PSRR performance of > 90 dB out past 1 MHz, see below.
This seems extremely optimistic. Is this really true?
-Steve
Part Number: TPS7B4250-Q1 I want to get output current more than 50 mA from the device.
Provided, 7 V IN ,5 V OUT and 150 mA output current
In above case, the power dissipation in the device is 300 mW only, less than 350 mW (7 V * 50 mA)
Am I wrong?
…
Part Number: TPS7B4250-Q1 Hello Team,
following question raise up:
We could not understand the sentence highlighted below. Does it mean the min out cap -> 1uF +/- 30%?
BR Josef