Part Number: TPS7B6350EVM Hi,
The datasheet states that the capacitor that sets the delay for TPS7B6350QPWPRQ1 is 100pF to 100nF. I calculated the required delay time and found it to be 150nF. Is it possible to use it? What should I be careful about…
Part Number: TPS7B6350EVM Dear SIr,
- Vin = 12.7V
- Vout = 5.0V
- Iout = 60mA
our condition is above. we will calculate estimate RθJA. I use thermal information in datasheet.
I have some question as below.
1. what is PCB condition below…
Part Number: TPS7B6350EVM Dera, Sir.
My customer is foocusing Infineon/TLS850F1TA V50 for their system,
Vin_max=16V, Vin_typ=12V, Io=250mA.
The product is D2PAK to consider the better thehrmal performamnce.
Against it, I am considering to promote…
Hi Tateo,
Here is the startup waveform for the TPS7B63-Q1 using the TPS7B6350EVM. The overshoot is about 200 mV.
Test Conditions:
Vin = 8 V
Vin Slew Rate = 2 V/ms
Vout = 5 V
Cin = 22 uF
Cout = 10 uF
Iout = 0 mA
There is more information…
Hey Hirata,
Using the TPS7B6350EVM to test, I sent a 3V signal to the EN pin and the delay to turn on is 1.055ms
Vin (10V) is the yellow, Vout (5V) is the pink, and EN (3V) is blue.
I hope this helps!
Thanks,
-Jimmy
