Part Number: TPS7B81 Hello,
Could you please help with providing these parameters for the TPS7B8133DGNR:
Thermal Conductivity [W/m*K]
Density [g/cm^3]
Specific Heat Capacity [J/g*K]
3D simplified geometry model of the component (STEP or Parasolid…
Part Number: TPS7B81 Tool/software: This is a reminder. for PPAP. Regarding the reminder, the PPAP website states that you should apply through this website. The PPAP application number is PPAP20250709-043301. The application date is July 9th. Please…
Part Number: TPS7B81 Tool/software: Dear TI,
is there any way we can find out which locations the wafer are produced?
Specific item: TPS7B8133QDRVRQ1
Maybe you can also give me a contact who i could ask for also below two other items:
TPS7B8650QDDARQ1…
Part Number: TPS7B81-Q1 Tool/software: Hi Team,
could you help to understand which fialure are included in "output not in specifciation".
How do you define this?
What is included ? e.g. drift, output toggling?
Is there a seperate sub-distribution…
Part Number: TPS7B81-Q1 Tool/software: Hi team,
Our customer is evaluating TPS7B8150QDRVRQ1, and they are looking for a SMD socket as shown below.
Purpose is to have the lower socket soldered onto a master PCB, and the upper socket mounted on the…
Part Number: TPS7B81-Q1
Tool/software:
Hi Team，
Harman uses the following chips in the platform, please help provide components detailed model：
5V LDO-TPS7B8150
4059446
Here is the requirement for detailed model:
Ecxml…
Part Number: TPS7B81 Other Parts Discussed in Thread: TPS709 Hi Team,
Could you please kindly help to check for TPS7B81 with 24.5V input voltage, and 3.3V output voltage, En pin pull high, and connect to a 10uA load, then, what is the actual current…
Part Number: TPS7B81-Q1 Tool/software: Hello Together, I am using the TPS7B8150QDGNRQ1 (Fixed 5V version) in one of our applications. As per the datasheet, the thermal shutdown is specified to occur at 175°C (device turns OFF) and the device resumes operation…
Part Number: TPS7B81 Other Parts Discussed in Thread: TPS7B84-Q1 ,
Tool/software:
Hi Team
I tried to simulate TPS7B84-Q1 using the model you provide in the related webpage. I used OrCAD PSPICE A/D ver 22.1.
Model works fine at 25°C.
When I try…
Hi Roy,
Thanks for you patience here.
We don't have a document regarding frequency of fault conditions - this depends on your PCB conditions.
I would refer to TPS7B81-Q1 Functional Safety FIT Rate, FMD and Pin FMA for information regarding what…
