The TI E2E™ design support forums will undergo maintenance from July 11 to July 13. If you need design support during this time, open a new support request with our customer support center.
Part Number: TPS7B81-Q1 TI Team,
Customer needs to toggle TPS7B81-Q1 EN pin, to indicate system faulte mode.
Is there any filtering/deglitch circuit inside IC at the EN function?
Part Number: TPS7B81-Q1 Please confirm what will be the waveform plot or peak current value of inrush current at VIN=EN=12 V, Cout=10uF, Vout=5 V?
I checked the datasheet, but I couldn't find it.
best regards,
manabu.
Part Number: TPS7B81-Q1 Other Parts Discussed in Thread: BQ294502 , Used by TPS7B81-Q1, BQ294502, etc. I can get the data from the part datasheets but the general package drawing for DRV 6 doesn't have them.
www.ti.com/.../mpds216e
Part Number: TPS7B81-Q1 Hello Team, Could you give us the minimum and maximum data of Power-Up Waveform slope(fig.8-8 temparature:-40℃～125℃).
Regards,
Shohei Okuyama
Part Number: TPS7B81-Q1 Please confirm what will be the voltage relationship between VIN and VOUT in Dropout mode. I would like to know the relation VOUT=VIN- xx V which the condition TJ = –40°C to +150°C. VOUT= VIN-V(Dropout), is that correct…
Part Number: TPS7B81-Q1 Reading section 8.2.2.1 Input Capacitor in https://www.ti.com/lit/ds/symlink/tps7b81-q1.pdf, the suggested good practice is to connect a capacitor of 10-uF to 22-uF. Does this suggested range take into account any DC bias derating…
Part Number: TPS7B81-Q1 Hello Together,
We are using this part TPS7B8150QDGNRQ1 in our C-Sample phase with the below configuration.
UBD_VP_PI is the reverse voltage and transient protected automotive battery voltage.VDZ5_PERM is 5V which is present always…
Part Number: DRV8106-Q1 Other Parts Discussed in Thread: TPS7B81-Q1 Tool/software: Hello Team,
We are planning to use the DRV8106-Q1 in our design to drive an inductive load. According to the datasheet, it has an input offset voltage of +/- 3.5 mV at…
Part Number: BQ25172 Other Parts Discussed in Thread: TPS7B81-Q1 Tool/software: Dear TI Support,
The STAT pin for driving an LED on the bq25172 gets pulled up to a Vref voltage that comes from a 3V3 voltage regulator.
Looks like the EVM schematic uses…
Part Number: TPS7B81-Q1 Hello Expert,
Our customer want to confirm about " coplanarity " of "TPS7B8150QKVURQ1"
Could you provide this data?
I'm looking forward to hearing back from you.
Thank you and best regards, Kazuki Kuramo…
