Part Number: TPS7B86-Q1 Tool/software: HI Team,
We are considering the DDA package for TPS7B86-Q1, and we find it have the B version and D version, and we only find its pin out are different. For the detailed spec, they are still have any different…
Part Number: TPS7B86-Q1 Tool/software: Hello, in Q" 2025 I have today the same issue than observed one year and half. I have V_FBK floating error during simulation on TPS7B8750. When updated pspice model will be released please? A parallel question, is…
Part Number: TPS7B86-Q1 Tool/software: Hi Team
Does it have an anti-saturation circuit? If not, then it may consume a lot of current when input voltage is low, e.g. during start-up. How much bias current does the regulator consume during drop-out, e…
Part Number: TPS7B86-Q1 Hi team,
Can you please help review the TPS7B8601BQDDARQ1 SCH as attached?
06_A2B AUDIO& ADC .pdf
Customer pull-up the PG pin to sys_3v3, and the sys_3v3 sequence is ealier than SOC_A2B_8V_EN. Is there any risk here?
Thank…
Part Number: TPS7B86-Q1 Tool/software: For TPS7B8633BQ, do you have specifications or data for VOUT = 3.3 V, IOUT = 0 mA to 375 mA, slew rate = 0.1 A/µs or similar condition?
(I found some data for slew rate=0.1A/us in datasheet but IOUT is smaller…
Part Number: TPS7B86-Q1 Tool/software: Hi Team,
Can we share some materials on how does TI do tri-temp test on automotive grade LDO products? Which process has the test and what is the test condition.
Thank you!
Regards,
Frank
Part Number: TPS7B86-Q1 Tool/software: Good Afternoon,
I'm completing a semiconductor questionnaire for an automotive quote that requests technology node/gate width in nm and wafer size. Could you please provide this information for the TPS7B8601DQDDARQ1…
Part Number: TPS7B86-Q1 Tool/software: Hi team,
My customer is using TPS7B8650-Q1 and found that the enable logic level is not the same as stated in datasheet. In datasheet VIL=0.7V, VIH=2V, while when testing customer found when input voltage to enable…
Part Number: TPS7B86-Q1 Other Parts Discussed in Thread: TPS7B84-Q1 Tool/software: Whether we have LDO integrated output discharge function? (Similar voltage/current requirements like TPS7B86-Q1)
Or whether PG PIN could be connected to output to achieve…
Part Number: TPS7B86-Q1 Tool/software: Hello
Below is the block diagram of power section. Product fails (CAN transmission gets interrupted) during BCI testing.
Capacitor used in
Load dump output is 1uF/50V/1206
LDO 1 input is 1uF/50V/0805
…
