Part Number: TPS7B86-Q1 Tool/software: Hi team,
I would like to use high impedance resistor to minimize standby current for PGADJ.
Could you please advice how much is input leakage of PGADJ pin?
Is that same as Ilkg(PG) as below?
regards,
Part Number: TPS7B86-Q1 Tool/software: Hello.
I would like to know the baking conditions when the device is exposed to moisture.
Please let us know the baking temperature and holding time according to various situations(For example, depending on…
Part Number: TPS7B86-Q1 Tool/software: What is the rise time of Vout when EN = Hi?
Please let me know the time for three pattern of Vout percentage below.
[1] 10% -> 90%
[2] 10% -> 60%
[3] 10% -> 40%
circuit conditions：
Vin = typ.13.5V(range…
Part Number: TPS7B86-Q1 Tool/software: Hi
This LDO has an OCP function in Spec. During the measurement recently, it was found that under certain conditions,
OCP cannot be performed. As shown in the figure below, yellow is the MCU output voltage and…
Part Number: TPS7B86-Q1 Hello Nick,
Thanks for your feedback !!
We want to understand the device and PG pin behavior when Vout gets short to BAT voltage for different Vin i.e. 8V,13.5V,18V & 24V.
Whether the IC will have no impact in the above-mentioned…
Part Number: TPS7B86-Q1 Tool/software: we are using 2 LDOs of TPS7B8601QDDARQ1 in supply line of our product. While conducting the BCI testing at 100mA, the product become OFF or reset between the frequency range of 10MHz to 50MHz. but in between
…
Part Number: TPS7B86-Q1 Hi team， 1、Is there a more detailed schematic design reference diagram for the EN and PG pins?
2、 When the TPS7B86-Q1 application circuit design output is 12V, are there any specific recommended values for the R1 and R2…
Part Number: TPS7B86-Q1 Hello,
I am using TPS7B86-Q1 part for 24V supply system (Automotive). My output voltage is 16V. I understand from datasheet that maximum supply voltage can be 40V. But I would like to know, how immune is TPS7B86-Q1 for Transients…
