Part Number: TPS84610 Hi,
we are doing FMEA analysis of circuit with TPS84610 inside.
Could you explain me what happens when Vin is higher (12V) than the max absolute rating value?
My concern is to verify that the consequent faut does not cause the input…
Part Number: TPS84610 Other Parts Discussed in Thread: PTH08T231W TI's monolithic devices have reliability data.
I can't find any reliability data for TPS84610 or PTH08T231
Is this because they are modules and therefore there is no data available…
Part Number: TPS84610 I want to have several TPS84610 track like figure 33 in the datasheet. I can probably do it by cascading voltage dividers per the diagram but I would like to understand what is going on.
However, the functional block diagram on page…
Part Number: LMZ30606EVM-003 Other Parts Discussed in Thread: TPS84610 , , LMZ30606 I am doing a failure test for the LMZ30606 6A Power Module using the evaluation board LMZ30606EVM-003. The evaluation board's IC marking say "TPS84610" instead of the expected…
Part Number: TPS84610 Hi,
We've been using TPS84610 on a circuit card for some time now and have had some of them fail with its output shorted to ground internally. What would be the failure mechanism in this instance?
Other Parts Discussed in Thread: TPS84610 Hi,
What are the internal resistor values tied to the INH pin in a TPS84610 device? I am currently using an open drain buffer, 74LVC2G07, connected to the IHN pin and I want to make sure this open drain device…
Other Parts Discussed in Thread: TPS84610 Hi Team,
I am using TPS84610 for an application. I need to evaluate the performance of my load without using the DC/DC module. Can I safely connect an external DC source on my output of TPS84610 while holding…
Other Parts Discussed in Thread: TPS84610 Hello all contributors,
I need to produce two power supplies with one (1.8V) which needs to always stay upper than {the other one (1.2V) minus 200mV}, until both of them goes below 300mV. This, even in case of…
