Part Number: TPS92515-Q1 Other Parts Discussed in Thread: TPS92515 Hi team,
i notice this link, there is a limit condition for the PWM=30Hz ，but the duty cycle is a concern.
https://e2e.ti.com/support/power-management-group/power-management/f/power…
Part Number: TPS92515
Tool/software:
Hello Expert I am using TPS92515 IC for my project. With 24V input voltage, can I use it to drive 3.3V LED with max current 2A without any problem? Can I use additional filters like Pi filter at input to reduce…
Part Number: TPS92515 Hello TI support,
We intend to use TPS92515 in an constant current application with load of 156mH & 50 ohms (coil).
1. Can we use IADJ pin to set constant current of 250mA ? Or that pin can only be used to control max current…
Other Parts Discussed in Thread: TPS92515 Tool/software: ORPSIM-15113，在进行仿真时，出现此错误，
ERROR(ORPSIM-15113): Model TG_TYP used by D_D5 is undefined，是一个LED器件，仿真时报错显示未定义。附件包含了厂商的LED仿真lib文件。
KW_CULPM1_TG.DSN
Part Number: TPS92515 Hi,
We are currently facing the exact issue reported here:
https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/1066622/tps92515-repeatability-error-on-a-design-using-vadj/3946512?tisearch…
Part Number: TPS92515 Hello, I would like to ask you about the TPS92515. What should be the actual value of ±Vcst_offset for Equation 6 in the datasheet? If VIADJ=2.2V, does that mean it varies from +3.5mV to -8.5mV? Best regards,
Part Number: TPS92515-Q1 Hi team,
Looking at the calculations for Roff in the datasheet and the calculator tool, I had a few questions regarding the Roff sizing.
If we have a fixed input voltage, should we be sizing our Roff for our maximum or minimum…
Part Number: TPS92515-Q1 Other Parts Discussed in Thread: TPS92515HV What is the maximum switching frequency of the TPS92515HV? Assuming maximum output current of 2A.
