Part Number: TPS92602EVM
Hi team,
My customer do validating with EVM.
They set Rsns=300mOhm + Analog Dimming function so that Isns is limited 300mA.
When they input PWMIN=10%, EVM shows Open LED Detected but LED still light. Is this correct operation…
Part Number: TPS92602EVM Dear Sir/Ms.
My customer tested the input voltage characteristics of TPS92602EVM, the output uses 8 crystal white LED and 9 crystal white LED
When testing low voltage, the customer will start from 13.5V down to below 5V and…
Part Number: TPS92602EVM Hi ,
One of my customer using TPS92602 Evaluation Module for LED driver .
In this design there are two output of 75V1A.
Customer need to drive 38 V @ 400 mA at output channel_1 and
22V @ 400 mA at Output channel_2 of TPS92602BQPWPRQ1…
Part Number: TPS92602EVM Other Parts Discussed in Thread: TPS92602-Q1 Hi, I am a student and i want to start my project to drive high power LED.
My LED specifications are: Size: 34*34*1.0mm Power: 100W Current: 2A Voltage: 70-75V Peak Irradiance: 8W…
Part Number: TPS92602EVM We are evaluating PWM-Only dimming for a new LED driver design using the EVM module. We configure the EVM as a buck-to-battery converter. Power in = 19V. Current range: 0 -700mA. Vout at 700mA = 10V. Sw Freq = 600kHz
For any…
Part Number: TPS92602EVM My customer Juoku use TPS92602EVM for automotive lighting. As EVM UG said it can reach 40V while my customer only reach 15V, she wants to know what's wrong and need TI expert advise. I also tag my customer in this post so she…
Other Parts Discussed in Thread: TPS92602EVM Hello, I previously bought TPS92602EVM, and find that it's output is not completely steady under testing I wondering to find out is there any JUMPER need to connect before power on it. The image is the OUTPUT…
