Part Number: TPS92612-Q1 Other Parts Discussed in Thread: TPS92612 Tool/software: Hi team,
Customer think of extending the wiring from the board with TPS92612 to an LED installed in another part of the vehicle to drive the LED. (For example, is it necessary…
Part Number: TPS92612-Q1 Tool/software: Hello,
I would like to know how many LED with 3,3v forward voltage could be driven by the TPS92612-Q1 with 24v power supply and led current up to 20mA.
In datasheet, all the example shown only 3 LED maximum but…
Part Number: TPS92612-Q1 Hello,
Do we have recommended values for PWM input max input current across temperature/voltage range?
Thanks,
Alberto Gonzalez
Part Number: TPS92612-Q1 Other Parts Discussed in Thread: TPS92621-Q1 Hi, My customer is looking for a p2p alternative to OnSemi's NSV45060JDT4G (Adjustable Constant Current Regulator & LED Driver). The CrossRef tools does not know the OnSemi part…
Part Number: TPS92612-Q1 Other Parts Discussed in Thread: TPS92612 Hello TI Support,
I want to use the TPS92612 in a design. I would like to run it above 20Khz but lower than 100KHz. Would this be possible to do with the TPS92612.
What are the limitation…
Part Number: TPS92612-Q1 Hello Concern,
We are using TPS92612-Q1 in our Application - as we have a requirement of Short to Battery protection.
But when we are shorting the OUT pin to VBAT --> LED Driver got damaged (After Reset Showing the 0.4V @ OUT…
Part Number: TPS92612-Q1
Hi,
My question is on TPS92612-Q1. Does this LED driver support the below configuration?
Typical Vf (LED)=2.35V and maximum current that I am sourcing 44mA from Out pin of the IC.
Can PWM pin of the IC can be connected directly…
Hi Nir,
Thanks for the sharing, if you want a non-Auto version, tps92612-q1 could meet your requirement, please keep in mind it's a linear part, that means your input voltage must be higher than output voltage plus dropout voltage. would you consider…
Part Number: TPS92612 Der Sir/Ms.
My customer compares TPS92612 with TPS92612-Q1 data sheet, but can't compare the difference from the characteristic table. The car certification will guarantee the yield rate. I compare the value of MTBF/FIT is the same…