Part Number: TPS92692-Q1 Hi Team,
We are using the TPS92692-Q1 in boost mode in our design. The input voltage ranges from 9–36 V, and the LED driver is controlled using a PWM signal (1 Hz to 67 Hz) with a 1 ms ON time. The output is approximately 48…
Part Number: TPS92692-Q1 am using PSPICE in Cadence Allegro 17.4. An error occurs in the simulation.
I using olb file of TPS92692-Q1 Boost and Buck Boost PSpice Transient Model (Rev. A) of TPS92692-Q1 data sheet, product information and support | TI…
Part Number: TPS92692-Q1 Tool/software: Hi team. Please tell me the output error of TPS92692-Q1.
-What is the output error of the error amplifier? -What is the output error of the current amplifier? -Are there any parts other than the error amplifier…
Part Number: TPS92692-Q1 Other Parts Discussed in Thread: TPS92692 Tool/software: Hi team,
My customer is using the SEPIC application of TPS92692-Q1. When the input voltage rapidly switches between power-on and power off, the output current fails to…
Part Number: TPS92692 Tool/software: Hi Team,
We are considering TPS92692 for one of our designs. The input is 9V-36V. The output current is expected to be around 10A at 50V.
The PWM input is from 1Hz to 67Hz. The on-time for all of these is 1ms…
Part Number: TPS92692-Q1 Other Parts Discussed in Thread: TPS92692 hello
when i use the TPS92692, i found that The start-up time of the chip varies with different PWM input duty cycles.
please refer to the follow picture.
the blue line is the input…
Part Number: TPS92692 Hi TI Team,
Need to Pass CISPR25 Class 4 in conducted emission test for the TPS92692 IC.
I build a SEPIC converter to drive LED with TPS92692Q1. (refer to EVM schematic)
Input voltage =8~18V
LED = 4LED in series (VF=3.1~3…
Part Number: TPS92692-Q1 Tool/software:
Hello , I would like to know the following
1.) what is the function of Q2 PNP transistor in the application circuit shown in datasheet? how to select it?
2.) How is boost to battery and Buck boost topology…
Part Number: TPS92692 HI engineers:
About the TPS92692 dimming Contrast Ratio, How do I calculate dimming contrast 15:1 , or can you Provide the formula？
Thank you.
Johnsin Tao
