Part Number: TPSF12C1 hi,
REFGND and IGND pins are all connected with PE terminal on TPSF12C1 EVM.
To support 1-phase(2-wire) with only L and N terminals, but without PE terminal, how to connect REFGND and IGND pins of TPSF12C1?
Other Parts Discussed in Thread: TPSF12C1 , TPSF12C3 Part Numbers: TPSF12C1/3/-Q1
TPSF12C1/-Q1 and TPSF12C3/-Q1 FAQ home page
This is the home page for common questions and collateral resources related to the TI's new family of power-supply filter…
Part Number: TPSF12C1-Q1 I am struggling to make changes to the design provided in the excel tool.
From my understanding the gain is set by Rg, and the two capacitors. As a note it is shown that any substantial changes are not recommended. I wanted…
Part Number: TPSF12C1-Q1 Is it possible to use the TPSF12C1-Q1 for single Phase 1000V DC Applications?
The system in question is a DC/AC inverter and would benefit from the active CM noise rejection.
Part Number: TPSF12C1-Q1 Hi,
We at Rolls-Royce found the active Common mode filtering very interesting.
We have few questions:
Can this solution be used for DC-side active common mode filtering for example in a battery driven motor drive?
Does…
Part Number: TPSF12C1-Q1 Please confirm that the order of the leads in the red circle of TPSF12C1-Q1 can be changed at will? For example, 1A and 1B were originally connected to the L line, but now they are connected to the N line. If it can be swapped…
Part Number: TPSF12C1-Q1 Hi team,
We found FIT rate difference between "FuSa information" and "Quality, reliability & packaging data download". Could you tell me why each FIT rate is different? Which one could we use?
"FuSa document", Table 2-1: https…
Part Number: TPSF12C1-Q1 Other Parts Discussed in Thread: TPSF12CX-DESIGN-CALC Hello,
I have a trouble with the design tool "TPSF12CX-DESIGN-CALC".
When I choose the CM choke model "1. Equivalent Circuit Model" in the Step 2, I cannot enter CM choke…
Part Number: TPSF12C1-Q1 Hello,
I am trying to design active EMI filter using TPSF12C1-Q1. Regarding that, firstly I have designed a passive filter by following procedure from Biricha digital. That passive filter circuit is shown below-
Now, I want…
