Part Number: TPSM33625 Other Parts Discussed in Thread: TPSM84338 Hi All,
I have a question about the MSL for power module products.
The TPSM33625 and TPSM6361 products, released around 2022, will have an MSL level of 3.
The TPSM84338 and TPSM336xx…
Part Number: TPSM33625 Tool/software: Hello Team,
We are using TPSM33625RDNR part for the 5V regulation. Input voltage will be 19V to 29.5V (29.5V Typ), total current on 5V is ~55mA.
We have observation that while we tuned off and turn on again…
Part Number: TPSM33625 Tool/software: Hi Experts,
We' like to ask assistance on the issue encountered by the customer with TPSM33625RDNR:
This schematic and board file applied on TPSM33625RDNR -the input voltage range [20v-26v] and the nominal voltage…
Part Number: TPSM33625 Tool/software: Hello Team,
we have initiated one thread over etoe as follow:
TPSM33625: TPSM33625RDNR
In that we have below observation
Please find an attached requested input and output voltage and inrush current waveforms…
Part Number: TPSM33625 HI,
We want to verify changes we notice between last and earlier versions of LAND Pattern.
We observed that in the 2025 doc , thermal vias were removed from pad 5 and pad 6.
Is it correct ?
Is not it necessary for heat removal…
Other Parts Discussed in Thread: PSPICE-FOR-TI Tool/software:
TPSM33625 Transient PSpice Model
SNVMCA6.ZIP (655 KB) - PSpice Model
When I run the simulation using the example above, a window like the one below appear and the program close shortly…
Part Number: TPSM33625 Tool/software: Hi,
In a new card that just arrived from assembly, a conversion circuit from 24V to 12V. The problem is that for some reason the circuit is in DROPOUT mode, meaning the output follows the input (minus DROPOUT voltage…
Part Number: TPSM33625 Tool/software: Hello Team,
Good day!!
We would like to simulate a buck converter using the TPSM33625 IC. We obtained the PSpice model from the official Texas Instruments website. However, when attempting to import the model…
Part Number: TPSM33625 Tool/software: There're few questions about thermal measurements on control board in MD.
Since recommended TJ, max is specified as 125degree, customer would like to estimate TJ more precisely.
1. What's the difference between…
Part Number: TPSM33625 Tool/software: Hello,
We used the part in our design as a regulator from +24V input to +5V. When powered up for the first time with +24V applied and minimal load (around 50mA), it regulates to the intended voltage by around 20…
