Part Number: TPSM365R6 Hi,
I'm using a TPSM365R6FRDN in my project to convert 54V to 5V with a 150mA load on the output side (5V).
I designed it and tested and the output voltage is 5V and everything seems fine. The only problem is that the temperature…
Part Number: TPSM365R6 Hi team,
Customer wants to utilize it on CC control for LED driver with series LED and low-side shunt.
Does it have limitation on dimming frequency because of EN pin timing requirement.
Best regards,
Hayashi
Part Number: TPSM365R6 Hi,
We are engaged in hardware and software development for end user, mostly in the IoT field.
For one of our projects, we have shortlisted "TPSM365R6RDNR" in our power management section. But we cannot find any footprint for proceed…
Part Number: TPSM365R6 Hi,
I am missing the step file for TPSM365R6V5RDNR, could you please advice where to find this step file. I could see in one of the post in the forum that it was shown as an image but was not able to find where to download it.
…
Part Number: TPSM365R6
Hello, since this module can handle up to 65V on the input, I am concerned about pads 1-4 as the clearances are only ~15.7 mils as shown below:
This is the Ultra Librarian Ecad model downloaded from TI's product page: https:…
Part Number: TPSM365R6 Hi,
I am using Pspice for TI. I downloaded the TPSM365R6 spice (encrypted) model from https://www.ti.com/lit/zip/snvmcb3 .
When running the simulation this error pops-up: "ERROR(ORPSIM-15167): Undefined parameter: LOAD."…
Part Number: TPSM365R6 Hi Team,
I would like to ask for some help for SCH review, can you help me kindly check this?
one quesiton :
Can the EN Pin be directly connected to the GPIO of the MCU or does it need some special circuit?
Jenson
Part Number: TPSM365R6 Hi :
I have some problems about the PCB package for TPSM365R6, please see the below pciture.
1、there are two circles in the Pad 3 and 6 marked in red, it means add two vias into the pad?
2、 there are three circles with dotted line…
