Part Number: TPSM63606 Other Parts Discussed in Thread: LM63460-Q1 Hi experts:
Can TPSM63606 support output 1.8V@6A with 12V input?
I am searching for a solution to regulate 12V input to the output 1.8V@6A, 2.5V @6A , 3.3V @6A , 5V @6A , 7.5V @6A…
Part Number: TPSM63606 Hi,
We have a board where two of the TPSM63606 dc dc convertors have caught on fire when the input power was connected.
Input : 18-24V low internal resistance battery
Output of one TPSM63606 : 14.4v
Output of other TPSM63606…
Part Number: TPSM63606 Dear Sir:
The card was manufactured and soldered already, but the chips of tpsm63606 are very hot after several minutes? I have used 3 pcs tpsm63606, is it too much?
Part Number: TPSM63606 Other Parts Discussed in Thread: LMZ14203H , TLVM13630
Hi ,
1) TPSM63606 can be used as negative buck boost and Can meet 5Vin, -10Vout @ 3Amp as per Data sheet Specs. Please confirm if my understanding is correct
2…
Part Number: TPSM63606 Other Parts Discussed in Thread: TPS564257 I am going to use TPSM63606 and TPS564257.
My customer wants to perfectly disconnect the Vout line with their load by software command.
The (mechnical) power relay could be a solution…
Part Number: TPSM63606 The EN voltage rising threshold is 1.263V.
The EN/SYNC is reference -VOUT ( Figure 9-12. Circuit Schematic in datasheet ) for IBB topology.
Is the RENB calculation using Equation 7 (reference to AGND) still valid?
Need help…
Part Number: TPSM63606 Hi team,
We are considering a power supply that can be changed from 24Vin to 2.4Vout to 8.5Vout.
What should the switching frequency be set to?
Best Regards,
Part Number: TPSM63606 Hi,
We recently received our first batch of boards with the TPSM63606S chip and we are doing EMI tests with them. We also tested the EVAL board for this IC and were very happy with the EMI results it gave.
However, now with…