Part Number: TPSM82822 Tool/software: Hi Team,
Do we have dual channel 2A Buck power module that can compete with LTM4691?
If not can we use two TPSM82822 to replace the LTM4691? Will two TPSM82822 in parallel support 180degree interleaving mode?
Thank…
Part Number: TPSM82822 Tool/software: Hi Team
As per below images we have found that RθJA value in datasheet is showing 92.6°C/W but in WEBENCH is showing 63.9°C/W, which one we need to consider and why it was different??
Thanks in advance…
Part Number: TPSM82822 Other Parts Discussed in Thread: TPS82084 , ADC12DL2500 Tool/software: Hi Team,
We have ADC (P/N: ADC12DL2500) in our design, For ADC VLVDS (5V input, 1.9V output 0.5A Load current) input we have old part (P/N: TPS82084) RθJA: 64.6…
Part Number: TPSM82822 Tool/software: Hi!
I used TPSM828222SILR device which is fixed 1.8V DCDC.
But our board doesn't work as 1.8V DCDC, the output is near VIN(3.3V)
Actually, this dcdc shematic design are very simple, and I check many times…
Part Number: TPSM82822 The recommended output capacitor value in the datasheet sheet is 10uF~47uF.Should i take the loads', the other IC, bypass capacitors into account?
Part Number: TPSM82822 My power module is configured as follows:
The graphs show when the module fails power on, and when it is successful. Blue line is vin_5v, yellow vo_xx (3.3V).
When the module fails, the ripple period is ~880us and the voltage…
Part Number: TPSM82822 Hello,
It is impossible to find stock of anything from the TPSM8282x family . Is it still active and in production?
Is there any drop in replacement for the adjustable or the 3.3V versions?
Thanks
Part Number: TPSM82822 Hi,
I use TPSM82822 to generate 1.5V and 3.3V. The order of power build-up is 1.5V first, then 3.3V
But the test result is 3.3V first, then 1.5V.
Is there any possible reason that the TPSM82822 will operate and output wihtout EN…
