Part Number: TPSM82822A Other Parts Discussed in Thread: TPSM82822 Tool/software:
Hi,
I’m evaluating the TPSM82822A to power Xilinx UltraScale+ transceiver rails (VMGTAVCC ~1.0 V, VMGTAVTT ~1.2 V, MGTVCCAUX ~1.8 V ). My target is <10 mVpp ripple at…
Part Number: TPSM82822A Other Parts Discussed in Thread: TPS628303 Hi Team,
Does this device take Step Loads response really well?
I will hit this device with 1.2A step loads repeatedly, once every minute, and the output cannot dip.
Is this a good…
Part Number: TPSM82822A Hello,
Does this IC support Vin - 5V, Vout - 0.85V, Iout - 2A?
Datasheet shows it supports, but when trying the same with webench it is displaying cannot design for the provided inputs.
Regards,
Nachiketh
Part Number: TPSM82813 Other Parts Discussed in Thread: TPSM82822A , I am using Webench for DC:DC converters TPSM82813 and TPSM82822A, however neither of these parts allow Simulation in Webench, they both show "Simulation not enabled for this design"…
Part Number: TPSM82822A Dear, support Team. I have a question from our customer quality control department.
Why is the Lead finish/Ball material different between TPSM828222 and TPSM828222A? TPSM828222 is ENEPIGA and TPSM828222 is NIPDAU.
https:/…
Part Number: TPSM82822A Hi team
Could you help check is there any difference from the perspective of efficiency and ripple performance for TPSM8282 3 ASILR and TPSM8282 2 ASILR?
My customer has already done the evaluation of TPSM8282 3 ASILR and they…
Part Number: TPSM82822A Hi support team,
I understand that when the output is normal, the PowerGood pin goes High after a 100μs delay.
Is 100μs a typical value? Or is it a Maximum value?
Regards, Dice-K
Part Number: TPSM82822A Other Parts Discussed in Thread: TPSM82822 Hello,
A customer of mine is interested in the TPSM82822ASILR, which is forced PWM adjustable device.
They noticed that the ripple is a bit lower than the TPSM82822SILR, which is…
Part Number: TPSM828302 Other Parts Discussed in Thread: TPSM82822A , TPSM828512 Tool/software: Hello,
I am evaluating the TPSM828302 to provide core power to a Spartan 7 FPGA with the following requirements:
1. Vin = 4.5V to 5.5V (Within the input…
