Part Number: TPSM84338 I am evaluating the TPSM84338 and are seeing unexpected output regulation behavior.
Configuration:
Input Voltage (VIN): 24 V
Output Voltage: 5.0 V
Output Capacitor: 47 µF ceramic
Operating Mode: FCCM enabled
Load Current…
Part Number: TPSM84338 Hi TI-Team,
using the TPSM84338 for generating 5V_SAFE-Voltage in a 5-20V USB PD-Application would result in a 20V level on the output of the converter for a time of around 20ms.
Background: we use a PD3.0 controller (DRP) which…
Part Number: TPSM84538 Other Parts Discussed in Thread: TPSM84338 , Hi, I am wondering whether there is thermal performance data (or power dissipation data) to better compare the TPSM84538 with TPSM84338 under similar/same operating conditions? TPSM84338…
Part Number: TPSM84338
Dear Sir/Madam,
I am using the TPSM84338 to produce 5V from a 12V supply. I need to program microcontroller using USB so have connected USB 5V supply through diode to the TPSM84338 5V output. I just want to check that the TPSM84338…
Part Number: TPSM84338 Other Parts Discussed in Thread: TPSM63604 , UCC29002 Dear Specialists,
My customer is interested in TPSM84338.
However, under the customer's conditions, the TJmax will be exceeded.
I would be grateful if you could advise…
Part Number: TPSM84338 Hello TI team,
I have been trying to simulate the transient response for the TPSM84338 model but facing issue as soon as I start the simulation. Could you please help to resolve this issue? Transient- 2.4A/230ns Vin-12V Vout-1…
Part Number: TPSM84338 Other Parts Discussed in Thread: TPSM84538 Hi,
I am looking for a Buck IC recommendation and information regarding TI's high-voltage power module roadmap. Please review the following two queries:
Buck IC Recommendation…
Part Number: TPSM84338
Tool/software:
The PSPICE simulation with this part gets to 11mS and then just sits there. No errors or indications it won't converge, just appears stalled at this time. If I probe the VIN current to the device, I see a spike…
Part Number: TPSM84338 Hi,
My customer is evaluating TPSM84338RCJR and they try to set Css to 0.01uF and tss=1.1ms should be expected in accordance with exuation (7) in the datasheet, but it was 1.9ms in the measurement on actual device.
In case of…
Part Number: TPSM84338 Is it advisable to use via-in-pad on the SW pad of this IC? By default, that is what's done on the footprints provided by SnapMagic and Ultra Librarian (see image below). The datasheet explicitly says to minimize the amount of copper…
