Search tips
Showing 46 results View by: Thread Post Sort by
    Answered

  • TPSM846C24: IS TPSM846C24MOLR the material in a special process or is it specially designed to withstand radiation?

    Resolved
    Part Number: TPSM846C24 Tool/software: Hi team, I'd like to ask TPSM846C24MOLR whether the material is in a special process or is it specially designed to withstand radiation? Or whether the PMIC option for the same die as this original can be recommended…
    • Resolved
    • Answered

  • TPSM846C24: Parallel configulation

    Resolved
    Part Number: TPSM846C24 Other Parts Discussed in Thread: TPS546C23 Tool/software: Hi team, When driving TPSM846C24 in parallel, is it necessary to supply an external clock? I am considering changing from a parallel configuration of TPS546C23 to a parallel…
    • Resolved

  • TPSM846C24: DESIGN REVIEW AND ISHARE, VSHARE, COMP CONFIGUARTION

    TI Thinks Resolved
    Part Number: TPSM846C24 Hi, We used TPSM846C24MOLR converter module in our design for 12V-1.1V conversion with 35A requirement for single operation. For VSHARE, ISHARE,SYNC and COMP we have just provided test points. Please verify the design and is it…
    • Answered

  • TPSM846C24: minimum sw freq using SYNC

    Resolved
    Part Number: TPSM846C24 If an external oscillator is used to drive the SYNC pin, is 230kHz too low for the sw freq? (the min. spec for sw freq is 300kHz but that may be due to the restricted range of 'Rt' values the part can work with when using the internal…
    • Resolved

  • TPSM846C24: High frequency noise

    TI Thinks Resolved
    Part Number: TPSM846C24 Hello, My customer is using the TPSM846C24 with two-phase mode. A high-frequency noise is generated from a board designed by the customer, and the customer suspects that it is coming from the TPSM846C24. Please let us know if there…
    • Answered

  • RE: TPSM846C24: schematic review helping

    Resolved
    Hello, Thanks for reattaching. Looking at your schematics they look fine. Please follow the layout guidelines on the datasheet. Thanks, Caleb
    • Answered

  • TPSM846C24: Vias on Footprint questions and AGND/PGND connection

    Resolved
    Part Number: TPSM846C24 Hi there, We use TPSM846C24 to convert 5V to 0.95V, 25A. S ome question to consult. Thanks ! 1. Could you help provide TPSM846C24 footprint files , we use allegro 16.6. The download file from product page seem not usable. 2. There…
    • Resolved

  • TPSM846C24: TPSM846C24 is QFM (MOL)

    TI Thinks Resolved
    Part Number: TPSM846C24 The footprint of TPSM846C24 is QFM (MOL). There are some questions about that. Does SOLDER MASK OPENING TYP(green solid line) mean that the footprint is on the IC? Does METAL UNDER SOLDER MASK TYP(blue dashed line) mean that the footprint…

  • TPSM846C24: confirmation of TPSM846C24 SPEC

    TI Thinks Resolved
    Part Number: TPSM846C24 1.the maximal spec of ripple is 13mV The actual messurement is 15.6mV (Vout: 1.2V & Vin:12V: Iout:26A) & 16mV (Vout: 0.85V & Vin:12V: Iout:18A) which does not meet the criteria 13mV How to explain the overspec ? like the…
    • Answered

  • TPSM846C24: Heatsink design

    Resolved
    Part Number: TPSM846C24 Other Parts Discussed in Thread: TPS546C23 , TPSM846C23 Hi team, My customer plans to use a heatsink on the top side of the device. Is it okay to put the heatsink on top? If yes, what is the maximum force applied to the package? Best…
    • Resolved

Didn't find what you are looking for? Post a new question.