Part Number: TPUL2G123 Tool/software: Hi,
I need to design a Cct that can generate a one shot pulse from a rising edge or longer input pulse. The Cct must allow the Pulse width to be varied from 5ns to 500ms.
I've looked at various discrete…
Part Number: SN74LVC1G123 Other Parts Discussed in Thread: TPUL2G123 ,
Hi team,
1.Can I get the curve of K with 1uF?
2. Min/Max variance of K in case of 390k Ω and 1uF
Best,
Shoo
Part Number: TLC555CALC Other Parts Discussed in Thread: TLC555 , TPUL2G123 Hello team,
I am working on the circuit where TLC555 should able to produce 200ns monopluse. i have used formula for time calculation T=1.1*R*C. But in TIN TI mono pulse is…
Part Number: SN74LVC00A Other Parts Discussed in Thread: TPUL2G123 , SN74AHC123A , TLV809E , SN74HC175 , SN74LVC2G14 , SN74HCS08 Tool/software: Hello
I want to make a circuit to monitor the status of reset signal of the Micro.
The reset signal is…
Hi Anand,
For this application you should use a more modern monostable multivibrator: TPUL2G123-Q1 data sheet, product information and support | TI.com
See this app note here and use the excel-based calculator on the product page to calculate RC for…
Hi John,
If you are able to lower the Vcc to 5.5V you can look into our new family of MMVs https://www.ti.com/product/TPUL2G123?keyMatch=TPUL&tisearch=universal_search&usecase=partmatches
1 us is possible with this device. The table below is in the…
Hi Allan,
The SN74LVC1G123 supports rising edge trigger on B input if A is held low and falling edge on A if B is held low. However, SN74LVC1G123 will not allow you to do both rising and falling edge triggers from the same input at the same time without…
Hi Obi,
1. I can't find a satisfactory answer to if these problems were solved.
2. That device or the CD74HC221 can work fine for this application. The main difference between the two will be the trigger level.
Is there a reason you chose the 221…
