Part Number: TRF370417EVM Hi team,
The BBIP, BBIN, and BBQP, BBQN on the TRF370417EVM reference board schematic do not have an external 50 ohm resistor to ground.
In use, if the IQ baseband output of the RhodSMW200A signal source is connected to the baseband…
Part Number: TRF370417EVM Other Parts Discussed in Thread: TRF370417 Measuring the return loss of the RF output of the TRF370417 evaluation board it appears to be less than 5dB from 4GHz and higher. In fact it's less than 2dB at 5.5GHz. This is only when…
Part Number: TRF370417EVM Other Parts Discussed in Thread: TRF370417 Hi Team,
Our customer bought a TRF370417EVM to do IQ modulation of a microwave signal that he use to manipulate a spin qubit. He has the following questions about the 5V power source …
Part Number: TRF370417EVM Other Parts Discussed in Thread: TRF370417 Are the base band inputs for this modulator internal biased to the 1.7V common mode? That is if these are AC coupled or transformer coupled to a differential DAC is an external bias voltage…
Part Number: TRF370417EVM Hello,
I'm trying to see the output of the TRF370417EVM evaluation module with only LO at the input as a first test.
The module is biased with 5 V and I and Q ports are biased with 1.7 V and terminated with 50 Ohm.
The LO…
Part Number: TRF370417EVM Other Parts Discussed in Thread: DAC38J84 , TRF370417 Dear Team,
My customer is using the TRF370417EVM with the following modifications (see attached)
LO : 2 to 6 GHz
I/Q: 50 to 500 MHz
While the conversion loss seems right and…
Part Number: TRF370417EVM The eval module schematic shows .1microfarad capacitors connected to ground on the IF inputs and 1 microfarad capacitors connected to ground on the RF output.
Given the high frequencies involved what is the function of these…
Other Parts Discussed in Thread: TRF370417EVM , TRF370417 , DAC3484 , DAC3482 , TRF3705 Hi,
I'm brand new to this device, and this field in general. I am looking to use the TRF370417EVM to perform frequency modulation of a supplied carrier signal (434MHz)…
Hi RJH,
Thank you for the reply!
We have tried the THS4509EVM with the TRF370417EVM. The setup is the following:
single ended I & Q: 200MHz, - 4dBm to THS4509EVM to J2 of THS4509EVM,
removed R7, R8 of THS4509EVM
shorted R9, R10 of THS4509EVM
using…