Part Number: TRF7964A Hi Champs:
Some questions:
Q1. If 14443, 15693, 18000-3 + Felica are needed from Customer, what's the Memory size we need for it?
Q2. Which M0 is able to merge those protocols?
Q3: Do we have any demo for this on M0?
please…
Part Number: TRF7964A Other Parts Discussed in Thread: DLP-7970ABP I've been developing my firmware using the DLP-7970ABP development board and got the ISO15693 Anti-Collision Algorithm with No response time interrupt working. I've transferred the firmware…
Part Number: TRF7964A Other Parts Discussed in Thread: TRF7970A A communication failure rarely occurs with the TRF7964ARHBT. (Communication is parallel) This phenomenon will not occur again once communication has been successfully performed.
If a communication…
Part Number: TRF7964A Hi TI Teams,
We have some question about the software of TRF7964A, the details are as follows:
1) An exception occurred while writing the TRF7964A register in continuous mode:
The SPI mode is used to communicate with TRF7964A. When…
Part Number: TRF7964A Other Parts Discussed in Thread: MSP430F2370 , RF37S114 Hi expert,
Customer made an RFID reader using MSP430F2370 and TRF7964A. The software code was referred to the example code sloc297c. Power supply is 5V, and in the program it…
Part Number: TRF7964A Other Parts Discussed in Thread: MSP430F2370 I have implemented the communication between MSP430F2370 and DLP-7970ABP , which can identify RFID tags.
Now I have a custom board based on MSP430F2370 and TRF7964A .
Now the msp430f2370 can…
Part Number: TRF7964A Other Parts Discussed in Thread: MSP430F2370 Hello,
I am designing an RFID reader using MSP430F2370 and TRF7964.
Now I can manipulate the registers of the trf7964, but when I read from the registers of the trf7964, the level of the…
Hello Becky,
thanks for decomposing the data. I agree the data on your board seems to be incorrect. You could try to narrow down from a different perspective. You could try different tags (maybe even of a different type). Or if possible you could try…
Part Number: TRF7964A Hi Andreas,
I am using probes on the SPI to understand where my problem is.
Below is a photo of the SPI on the Lauchpad. For some reason the MISO line suddenly started looking strange, even though everything is still working properly…
Part Number: TRF7964A Hi All,
Can you confirm the minimum drive strength required for the crystal that can be connected to the TRF7964A. Specification is not included in the datasheet of the TRF7964A.
Best Regards
Byron