Part Number: TS12A4516 Other Parts Discussed in Thread: TS5A4594 Hi,
We are using TS12A4516 part in our design, providing 5V to V+ and gnd to V-.
Our doubt is Whether we can connect gnd to V- or not, because the datasheet says it is a dual supply…
Part Number: TS12A4516 Dear all,
we are planning to use TS12A4516 to switch a bipolar signal in the range +/- 4 V. In our design we will use a +/- 5V as supply and we are in doubt about decoupling capacitor.
On datasheet ( SCDS236B revised in April…
Part Number: TS12A4516 My customer is using the TS12A4516 (DBV) in a design. I attached an image showing the implementation ( internal link )
They are going to production now, but have been seeing a 2~3 issues a month - and finally think they found…
Part Number: TS12A4516 Other Parts Discussed in Thread: TMUX1511 , SN74CB3Q3306A Hi Team,
My customer wants a chip to apply in his application. They want to a switch or a solution. Here are his requirements:
1.The output follows the input signal,…
Part Number: TS12A4516 Hi,
Can you help with some questions on TS12A4516:
Can the TS12A4516 handle something like VIN- = -2.5V and VIN+ = 5.8V to then allow for that range to pass through? Or do they have to be the same value (such as +/-5.8V)?…
Part Number: TS12A4516 Hi Team, Could you tell me the value of Theta JC (Junction to Case) for TS12A4516DBVR? I would also like to ask Tj-max for these. Best Regards, Yaita
Other Parts Discussed in Thread: OPA657 , TS12A4516 I have a photodiode amplifier circuit using OPA657. I'm thinking to use analog switch TS12A4516 to change the gain of amplifier.
The Rf resistor 50K in parallel with 5.5k with analog switch in series…
Adam,
Thank you! The 4516 has 5x better input capacitance, wider bandwidth, and most importantly, it's much cheaper than 12511! We will find a way to meet the control logic requirement.
Frank
Frank,
The plot below is for the TS12A4515 but the TS12A4514, TS12A4515, TS12A4516, and TS12A4517 family of switches have very similar performance.
Thank you,
Adam
Other Parts Discussed in Thread: TS12A12511 What analog switch, with equivalent performance to the TS12A4516DBVR (also tiny, low power), but operating with true 3.3V logic levels do you recommend ?
Will this circuit work reliably ?
