Part Number: TS5A23159 Dear Team,
There is a good news that we DIN TS5A23159 in our customer.
Could you help to review the schematic as below?
We appreciated your great support!
Many Thanks,
Jimmy
Part Number: TS5A23159
The Datasheet specs C NC(ON) , C NO(ON) , C COM(ON)
[1] Assuming a signal gets routed from [Host] -> [NO->COM] -> [Device]; will the signal see rise-times that relate to the combined C NO(ON) + C COM(ON) ?
[2] Basically, the bus capacitance…
Part Number: TS5A23157 Other Parts Discussed in Thread: TS5A23159 Tool/software: We have a question about the behavior of the part when it is unpowered i.e. Vdd=0V and the following scenarios:
Can In1, In2 be driven by another GPIO when device is u…
Part Number: TS5A23159 Other Parts Discussed in Thread: TS5A23160 , Hi Team,
I'm not sure about the major difference between TS5A23159 and TS5A23160.
Are they P2P and BOM to BOM device?
And why TS5A23159 is cheaper than TS5A23160, I see 159 has higher…
The NC/NO pins are not control inputs. The absolute maximum ratings forbid this; it could damage the device.
You need a switch with the "powered-off protection" feature like the TS5A23159 or TMUX154E.
Hi Yuchen,
Can you confirm that external pullups between TXS0108E and TS5A23159 are also removed (R171-R177 as well as R165 and R167)? Are there pullups internal to the driver on 1V8 side?
Regards,
Jack
Part Number: TS5A23159 Hi Team,
As I know, analog switch is often used by voltage source switch.
Could you let me know whether we could use current source as input? (COM1)
Roy
Part Number: TS5A23159 Other Parts Discussed in Thread: ISO15
Hi, for a project i'm planning to use the TS5A23159 in order to enable/disable RS485 devices lines, because i have many contact sensors that are placed around production environment, they…
Part Number: TS5A23159
I have a question on the Analog Switch TS5A23159,
What is the Isolation between Com to NC in power off state?
What will be state of Device when there is no V+ applied,
Will the device still be in Com-NC mode?
Dung,
If you would like to use a 100MHz clock we would recommend using a device with at least 3 times the clock frequency. You should select a device with at least 300MHz bandwidth. The TS5A23159 devices only has 100MHz bandwidth which means that device…
