Part Number: TS5A3166 Other Parts Discussed in Thread: OPA388 , TMUX1101 , CSD25501F3 , CSD13380F3 , TS3A24159 , TMUX1121 , TMUX1112 , INA333 Tool/software: Hello TI support,
We intend to use TS5A3166 in gain switching circuit as shown in attached image…
Part Number: TS5A3166 Other Parts Discussed in Thread: TCAN3414 Tool/software: Hello, I'm using TS5A3166 to terminate CANbus. Can someone confirm whether below schematic works? I'm using TCAN3414 for FDCAN. Also does TS5A3166 need decoupling caps?
Thank…
Part Number: TS5A3166-Q1 Tool/software: Hi,
The actual inrush current of the "TS5A3166QDCKRQ1" on our circuit board is 2.32 A peak. Please see the waveform in the link below.
The total inrush power is approximately 16.6 µW. Could you please confirm…
Part Number: TS5A3166 Tool/software: I am trying to design a circuit to control the RS485 bus 120 Ohm termination resistor using 3.3V GPIO from an STM32 MCU. I have never had such an application before.
My RS485 interface works with an isolated 5V supply…
Part Number: TS5A3166 Hello, I came across a PCB here: https://www.pcbway.com/project/shareproject/Analog_Switch_Module_x_4.html
It's an Analog switch module using the TI TS5A3166 SPST Analog Switch module.
https://www.ti.com/lit/ds/symlink/ts5a3166…
Part Number: TS5A3166-Q1 Other Parts Discussed in Thread: TS5A3166 , , TS5A3167 Hi,
I don't know if it is a mistake but the pin name NO description is Normally closed
And if we look further in the datasheet we have this function table
I know…
Part Number: TS5A3166 Other Parts Discussed in Thread: TS5A3167 , TMUX1511 Tool/software: Dear Team,
I am facing an issue and it is described here .
When Microcontroller is off the RTC clock is still on and draining the RTC battery via microcontrollers…
Part Number: TS5A3166 Dear Sir or Madam,
I am writing to know the terminal finish of TS5A3166DBVR if it is NiPdAu or NiAu or Au. Please could you tell me the thickness of Au.
Thanks in advance.
Best Regards,
Kaoutar Ben Kaddour
Part Number: TS5A3166 Hi There,
In my application, 2.8VV battery voltage is always presence at Pin 1 and TS5A3166 5pinSOT-23 is powered from other system 3.3V rail. Below scenario i have seen:
NOTE: Pin 4 is pulled down to ground by 49.9K.
1) At…