Part Number: TS5V330C Other Parts Discussed in Thread: TS5V330 Hi,
I'm in the process of designing a card that generates it's own VGA, but shall also be able to pass through a different VGA source. The "application clip" brochure for the older TS5V330…
Part Number: TS5V330C I have read the datasheet for the TS5V330C and I believe it will do what I need it to do.
I want to create a RGB KVM switch to use 1 monitor with 2 1980's era RGB + Sync computers for a group I am a part of and my company want…
Hi Joseph,
We do have some switches that support both positive and negative voltages. How about TMUX1636 . It is a 2:1, 2 channel mux that works well with dual supplies (±5 V to ±16.5 V), a single supply (10 V to 16.5 V), or asymmetric supplies.
Please…
Part Number: TS5V330C Other Parts Discussed in Thread: SN74CB3Q3257 , SN74CBT3257 , SN74CBT3257C , TS5N412 , CD74HCT4066 Hi,
I would like to know if we can use this switch generically for analog applications.
I've been using the NXP NX5DV330PW…
Part Number: TS5V330C Other Parts Discussed in Thread: TS5V330 Hello,
Regarding to the AC coupling capacitor on TS5V330C, my customer is asking a question.
(Question)
･They will use it on output (Dx) of TS5V330C.
Is it supported ? and is there…
Part Number: TS5V330C Hello,
Regarding to input(S1A,S2A) on TS5V330C, my customer is asking a question.
(Question)
･How much voltages is minimum value on input(S1A,S2A) as ABSOLUTE MAXIMUM RATINGS?
From the output voltage range(Vi/o) in datasheet…
Other Parts Discussed in Thread: TS5V330C , TS5A23159 Analog switch TS5V330C:
1) What is the expected maximum mismatch for the on resistance (both switch positions) for signals near rail and ground? Ron is typically 3 ohms with a max of 7 ohms at 1V…
Hirotaka-san
<Question1> Do you have the equivalent circuit of TS12A44514 ? Could you give us it?
The TS12A44514 is an unbuffered pass FET whose signal path can be ideally modeled as a 0 Ohm wire. In practice there will be parasitics that are specified…
Hi Bogey,
SN74CBT3390 is an 5V 8-channel 2:1 MUX and we do not have p2p replacement of it. I would like to know more about your customer's application because we have other channel count and configurations in 5V family. For example,
SN74CBT162292…
Hi Tom,
Thanks for the information!
So first off - this switch cannot pass negative signals - so if the 1Vp-p is centered at 0V there could be issues passing the signal without issue either with quality of signal or damage to the switch as it…
