• 

  David (ASIC) Liu

  • 4 months ago
  • Interface
  • Interface forum

  RE: TSB81BA3E: TSB81BA3E

  Hi Jim We need to clarify between the formatted/packet speed and port operating speed.. When you say sending the PHY packet at S200, we need to understand if this is the formatted/packet speed or the port operating speed. If they are sending the PHY...
• 

  Yaser Ibrahim

  • over 2 years ago
  • Interface
  • Interface forum

  RE: TSB41BA3D: Thermal Characteristics

  Hello Steve, Here are all the thermal parameters for TSB41BA3D: Theta JA-High K: 28.3 Theta JC, top: 14.8 Theta JB: 14.7 Psi JT: 0.4 Psi JB: 14.5 Theta JC, bottom: 6.3 For the maximum operational junction temperature, please use 105 C....
• 

  Robert Verbruggen

  • over 1 year ago
  • Interface
  • Interface forum

  RE: XIO2213B: Use of an external PHY

  Yes, I have seen the implementation guide for the XIO2213B but this described the application in case the internal Phy is used. We want to use the TSB41BA3D connected externally to the XIO2213B. Is it now still needed to power the internal Phy with 1...
• 

  Jacob Schaeffer53

  • over 4 years ago
  • Interface
  • Interface forum

  RE: TSB41BA3D with 49.152MHz Oscillator (not Crystal)

  Thank you for the reply
• 

  Clemens Ladisch

  • over 4 years ago
  • Interface
  • Interface forum

  RE: What is the correct Product ID for TSB41BA3D?

  The datasheet is wrong; the actual product ID has been observed to be 833005. (Can you confirm that the BA3B's ID actually is 833003?)
• 

  Elias Villegas M.

  • over 4 years ago
  • Interface
  • Interface forum

  RE: Does TSB82AA2BPGE correct the self-ID issue when using the TSB82AA2PGE with aTSB41BA3D

  Hello, The Self-ID problem affects the TSB41BA3D not the LLC. The TSB41BA3D requires the errata's workaround no matter with which version of the 82AA2 is being used with. Regards
• 

  Marty Rademacher

  • over 4 years ago
  • Interface
  • Interface forum

  RE: Self-ID problem using TSB82AA2A and TSB41BA3D

  We created our own 1394 library and are well on our way toward implementing the workaround. I was having trouble digging up the errata. Now that we understand the problem we are good to go.
• 

  Paul Knobloch

  • over 3 years ago
  • Interface
  • Interface forum

  TSB12LV32-EP: Reference schematic for LLC and PHY interconnects

  Part Number: TSB12LV32-EP Look for information and possibly a reference interconnect design/schematic for 1394b application using the TI chipset TSB12LV32 LLC and the TSB41BA3D PHY. In the TSB12LV32-ep PHY Data Sheet (Para 8.1) indicates a reference...
• 

  William Weishaupt

  • over 3 years ago
  • Interface
  • Interface forum

  TSB41BA3B-EP: TSB41BA3B 1.8V and 3.3V current Mx.

  TI Thinks Resolved

  Part Number: TSB41BA3B-EP 1) What is the max input current for 1.8V for the TSB41BA3B or TSB41BA3B-EP when using a external 1.8V instead of the internally generated voltage? 2) What is the max current for 3.3V over temperature for the TSB41BA3B or TSB41BA3B...
• 

  Jacob Schaeffer53

  • over 4 years ago
  • Interface
  • Interface forum

  XIO2213B LLC Only

  • Resolved

  . What if I ran the _L signals to another PHY (e.g. TSB41BA3D ) along with D0-D7? Would that work, and has

Didn't find what you are looking for? Post a new question.

• Ask a new question