Sergio,
For the ADC, you need to set bit 3 to a logic "1" in address 0x01 to change the output to offset binary. This is set to a "0" by default which is 2's comp.
For the DAC, the default is offset binary. This is address 0x2, bit 1. Setting this…
Other Parts Discussed in Thread: TSW30H84EVM I'm using the TSW3100EVM as a pattern generator and a TSW30H84EVM as an RF modulator. The software for both boards are installed on Windows XP and are functioning properly.
I've checked the TSW30H84EVM output…
Other Parts Discussed in Thread: TSW30H84EVM I've installed the software on Windows XP. The USB ethernet adapter and the TSW30H84EVM board are both recognized by the computer.
I'm trying to run the test setup procedure via the TSW3100_CommsSignalsPattern…
Other Parts Discussed in Thread: FMC-DAC-ADAPTER , FMC-ADC-ADAPTER Hello,
I was wondering if this RF evaluation module , and also this receiver , would have a kind of model to use in DSP Builder or System Generator.
Another question about these…
Hi!
Here is my config file for the TSW30H84EVM. In this example, I'm using a 10MHz external ref clk for the LMK. I dont use the DAC PLL so the DAC PLL is disabled. The VCO of the LMK is at twice of the DAC sampling rate (e.g 2.5GHz). My Xilinx ML605…
Other Parts Discussed in Thread: TSW30H84EVM , DAC34SH84 , DAC3482 , DAC3152 , ADS4229 , DAC3154 , DAC3152EVM , ADS4229EVM , ADS5403 , ADS4249 Greetings,
I am working on a project which involves the use of the TSW30H84EVM complete RF transmit chain…
Other Parts Discussed in Thread: TSW30H84EVM , DAC34H84 , TRF3705 Hello!
I recognized a frequency depending phase shift between the two LO signals on the output of the two RF paths of the TSW30H84EVM (see figure).
I used a constant on the DAC34H84…
Other Parts Discussed in Thread: TSW30H84EVM , DAC34H84 Hi, I bought TSW3100EVM, TSW1400EVM and TSW30H84EVM.
But, there is no circuit diagram for TSW3100, TSW1400 in the box and you web site also…
I’m trying to detail design LVDS (and others) interfaces…
