Part Number: TSW40RF82EVM Hi.
I bought TSW14J57EVM and TSW40RF82EVM for ADC.
However, I don’t have any clues about how to use this two boards although I carefully read user’s guide.
Can you explain how to set up this boards for ADC step by…
Hi, I had to use the DAC38RF82EVM to first once again verify the configuration was function as well as use the GUI to save the configuration for you because was unable to save the configuration using the TSW40RF80 GUI due to software problem (the save…
Part Number: TSW40RF82EVM
Hello Team,
Good day. I'm posting this inquiry in be half of my customers, please see details below.
When I run this demo board according to the instruction slau706A(Page 3-4), the waveform shown in the scope is not correct…
Part Number: TSW40RF82EVM Hi,
What should be the jumper settings if i wanted to 1) use external DAC clock at J8 and 2) use internal PLL clock? Could you provide photos if possible?
Thanks,
Steve
Hi Damien,
I was testing the ADC ini files on an ADC32RF45EVM. As both of us are using TSW14J56 capture card, the results are expected to be same. But as you are using TSW40RF82EVM, I'll setup the same EVM and try your test. I'll get back to you with…
Part Number: TSW40RF82EVM Hello
When the TSW40RF82EVM is connected to the TSW14J56 data capture EVM what is the maximum sample rate from the
TSW14J56 -> TSW40RF82EVM DAC38RF82 (single and dual channel operation)
and also for the TSW40RF82EVM ADC32RF45…
Part Number: TSW40RF82EVM Hello,
I generate a series of 64 frequencies separated by zeros on the DAC outputs of a TSW40RF82 board. I buy it with the ADC inputs. The noise between the generated frequencies depends on the NCO value used NCO = 200 MHz The noise…
Part Number: TSW40RF80EVM Hello Team,
I have a customer who is interested in purchasing the TSW14J56EVM and the TSW40RF80 devices. They want to just connect them together, turn it on and have MATLAB (for example) send a train of IQ bits and receive a synchronous…
