Part Number: TUSB1046EVM Please help to provide the TUSB1046EVM REV_A2 Gerber file. I had find the Gerber file is not correct for my EVM board. I attached my board picture below for you reference.
BR, Gary
Hi Aya
Long time no see I made a new board and checked it... but the monitor output is still not working.
In the case of the EVM board, if you connect the USB C type port to the monitor, you can check 5V on VBUS,
but the board I made cannot check the power…
Part Number: TUSB1046EVM Hi guys.
I have TUSB1046EVM and TUSB564EVM. and i'd like to use as DP --> USB C --> DP signal converter.
so I connect both EVM Kit like below.
1. PC(DP out) --> DP Cable --> TUSB1046 and PC(USB) --> TUSB1…
Part Number: TUSB1046EVM Other Parts Discussed in Thread: TUSB1046A-DCI , , TUSB1046-DCI Hi Team,
A customer is using TUSB1046EVM to develop a project for TUSB1046A-DCI. However, the chip installed in the EVM is the TUSB1046-DCI. I checked the difference of…
Hi Hans,
Sorry for the late reply.
Hans Nilsson said: Which default function does the Power Device control have (without extern flash), see below point <2>. Hans Nilsson said: For this basic configuration is it necessary to perform a configuration…
Part Number: TUSB1046EVM Other Parts Discussed in Thread: TPS65982 , TPS65987 Hi there,
as some others have asked before, I also need the project files to customize some settings of the PD-Controller on the TUSB1046EVM.
Thanks in advance!
Part Number: TUSB1046EVM Hey team, iv noticed that the pcb file and schematic are from another board. can you please send the design file through ? My email is andreas@enocys.com
Part Number: TUSB1046EVM Other Parts Discussed in Thread: TUSB1044 회로는 TUSB1046 EVM 보드를 참조하여 설계되었으며
USB C 유형 포트를 통해 USB C 유형 모니터를 출력하는 것이 목적입니다.
관련 회로도를 공유하고 기술 지원을 받고 싶습니다.
포럼에 글을 쓰는 것은 나에게 어렵고 열린 공간에 회로도를 첨부하는 것도 어렵습니다.
기술 지원을받을 수있는 이메일 주소를 공유하면 회로도를…