Part Number: TX75E16 Hello,
We are evaluating the TX75E16 for a new design and have a few datasheet questions.
T/R switch OFF state: the datasheet specifies a T/R switch OFF resistance of approximately 20ohm to ground. Is this clamp present in every…
Part Number: TX75E16 When generating pulser outputs, we observe a timing deviation of approximately ±6 ns between chips in the pulser output timing referenced to the TR_BF_SYNC pin. Is this level of timing variation considered normal?
Since a 160 MHz…
Part Number: TX75E16 When generating pulser outputs, we observe a timing deviation of approximately ±6 ns between chips in the pulser output timing referenced to the TR_BF_SYNC pin. Is this level of timing variation considered normal?
Since a 160 MHz…
Part Number: TX75E16 Other Parts Discussed in Thread: TX7516 Hello,
I am looking for technical support regarding Ultra Sound Pulser.
we're interesting in driving 16 capacitive elements (MEMS) - at the same time.
When the capacitance of each element…
Part Number: TX75E16 Other Parts Discussed in Thread: TX7516 , Hi,
Let me ask you a basic question about the difference between TX7516 and TX75E16.
I suppose the differnece is only following thing,
"Programmable load damp resistor: 200 Ω, 100 Ω…
Part Number: TX75E16 Tool/software: Hello,
I want to create a 5Mhz 1cycle pulse pattern. Condition: 160 MHz clock 1) AVDDM_HV_A (2A drive), AVDDP_HV_A (2A drive) 2) 5Mhz Pulse shape 예시 : +40V to -40V or -40V to +40V If you look at the NDA TX75E16 Datasheet…
Part Number: TX75E16
Tool/software:
Hello,
I found that the register values I wrote are inconsistent with the output waveform.The register values are as follows.
My programming theory is as follows.
Global repeat = 0，Local Repeat = 1，GND(4…
Part Number: TX75E16 Other Parts Discussed in Thread: LM96570 , Hi everybody,
For my company, I'm collecting some information (datasheets, AppNotes, ect...) to design an Ultrasound device with integrated Beam Forming. I was focused on the LM96570 but…
