Part Number: EVMK2GX
Hello,
I’m working with the EVMK2G evaluation board ( http://www.ti.com/tool/EVMK2G?keyMatch=EVMK2G&tisearch=Search-EN-everything&usecase=part-number ) trying to direct three pins to work as GPIO on the header J12. My starting…
Hello,
The UCC3806 is a dual output controller though it can be used in a flyback where only one of the outputs are used to drive the switch it might be better to choose a single output controller. Look at page 46 of the attached under General Purpose…
Siyu,
I think the toggle flip-flop in the block diagram on page one of the spec should have let you know that the max you will get with this device is 50% duty.
Go to page 43 and 44 of the attached and select a more suitable part.
Part Number: AM5728
I have a AM5728 custom board.
I use ti-processor-sdk-linux-am57xx-evm-06.03.00.106-Linux-x86-Install.bin
The CONFIG_USB_SERIAL_Option is m by default . I want to change it to y(CONFIG_USB_SERIAL_Option=y). what should I do? …
Hi Rick
I apologize that the information in the board product folder is not up to date. Here are links to the files for the latest version of the ADC12D1800RB.
Software: https://e2e.ti.com/cfs-file/__key/communityserver-discussions-components-files…
Peter,
i am enclosing the Power Management Guide for 2011. The section you will be interested in starts on page 43 and actual devices listed on page 46, With the minimum information you have given me I would expect that you will want something like…
Hi Rich,
We typically include the LM95233 temp sensor on our boards, see pg 4 of the schematic.
ADC12D1X00RF_RB-SCH_B.pdf
As far as characterization of the diode, we have some data that we've posted on the forums previously:
This was for the ADC10D1000…
Hi Dhaval,
Setting both switches 5 (PCIe_1L_MODE_SEL) and 6 (PCIe_2L_MODE_SEL) of SW3 to '1' results in PERST# stuck low. However, when setting the switches to '0', the PERST# signals transition from low to high. There seems to be a mistake in the SDK…
Hi Anuj,
From log message, I observed that there is some error when RTOS System Initialization.
But it seems that the initialization process start successfully for the 4 CHs AVB Capture +DEC usercase.
Does it result in the problem which couldn…
