Part Number: UC2906 Hi Team,
Our customer is using the UC2906N in one of their equipment and has some inquiries below.
I just want to know that the battery full indication of battery is available on the IC?
the 9th pin of the designated as over…
Part Number: UC2906 I have a UC2906N chip connected to a series pass PNP transistor (TO220 TIP32B) via pins 16 and 15. For some reason if we short the base and emitter the driver circuit starts. I don’t know why this is the series pass element seems to…
Part Number: UC2906 Other Parts Discussed in Thread: BQ24450 , Dear
I am Sunny from China.
I want to calculate its Tj. I have known the Tj=Tc+ Rjc*Pd. In this formula, I need to know the Rjc.
Could you please help tell me why the datasheet doesn…
Other Parts Discussed in Thread: UC2906 We are attempting to debug an issue with a design which includes the UC2906. In the design, a FET is used (ON SEMI 2N7002ET1G) at pin 14 (Compensation) to pull that pin high/low to enable/disable charging. A low…
Other Parts Discussed in Thread: UC2906 Are there any spice model for UC2906 IC? I googled it and cannot find it. Is there similar ic spice model? Thx for the help in advance.
Other Parts Discussed in Thread: UC2906 , BQ24450 I'm designing a battery charger with the UC2906. I need to provide 2A to the battery. I've seen all the configurations shown into the BQ24450 datasheet and U-104 application note, and several posts about…
Other Parts Discussed in Thread: UC2906 I'm making a battery charger with the UC2906, the circuit is similar to the following:
There is a microprocessor in the circuit, and I would like to use it to detect when the charger is in the "floating" state…
Other Parts Discussed in Thread: UC2906 , UC3906 Hello everyone. I have built a circuit to charge a 24V/5Ah lead acid battery using UC2906. Although the datasheet is not very helpful/detailed, I tried to follow the instructions and get this working. But…
Other Parts Discussed in Thread: UC2906 Dear All,
Ive designed a circuit for charging a Lead acid Battery rated at 12.2V 2.6Ah.
The chip that I used was the UC2906 Linear battery charger chip.
Here is the values I am working with:
ID = 75uA, Ichg…
