Part Number: UC3526 Hi,
We used uc3526 PWM controller IC for full bridge converter topology with 100kHz frequency for 1.2kW. But the input side of transformer, we are not getting proper pulsed dc waveform. Ringing is more and we cant see the dead…
Other Parts Discussed in Thread: UC3526 Hi!
Currently I am using UC3526 for 40KHz PWM generation.
During testing, i had observed after power up for few seconds i am getting the output A & B but then it vanishes.
As per datasheet, I am geeting SYNC…
Other Parts Discussed in Thread: UC3526 im working with UC3526, in push pull power supply, i need application note for this,
as im checking in normal board, tested only IC, kept rt, ct, and softstart capacitor,
their is no waveform at Ct, could…
Part Number: DRV8873 Other Parts Discussed in Thread: UC3526 Tool/software: Hello!
We are working on an application were the power line must be a sinusoidal wave around 50Hz, that is then rectified in the receiver to supply a DC load of 10V 2A.
Low…
Part Number: UCC28950 Other Parts Discussed in Thread: UC3526 , UCC29002 Currently, I have designed a DC-DC isolated converter using UC3526 and push-pull topology, which provides 36-60VDC input and 96VDC output. These designs have turned into 900W modules…
Dear sir
i have used uc3526 pwm controller with ucc27714d in the circuit
at transformer primary we getting pulsed dc waveform for 25khz we can see the dead time in the waveform
but when we go for high frequency 90khz waveform is not proper we…
Part Number: UC2842 Other Parts Discussed in Thread: UC2706 Dear team,
I am designing a push-Pull converter using UC2842 and UC2706 with reference to U-101 200KHz Current-Mode Converter provides 500W.
Can I get the simulation model for the power supply…
