Part Number: UCC27212 Other Parts Discussed in Thread: TPS4811-Q1 , TPS2595 Hi,
Do we have high side gate driver for below requirement?
input range: 3.5V ~ 5V
FET current: 4A
switching: xx kHz
If there is no proper solution, customer can utilize low side…
Part Number: UCC27212 Other Parts Discussed in Thread: OPA455 , SN6501 Hello, TI Expert :
1.I am use UCC27212 to control the MOSFET on or off, but when I turn the high side MOSFET on, the HB PIN will occur pulse wave, I don’t what is happen. Can…
Part Number: UCC27212 Hello!
I have some questions about how to make UCC27212's output function as datasheet.
According to information on page 5, which says the maximum value for output VLO and VHO are VDD+0.3 and VHB+0.3.
And here is my circuit…
Part Number: UCC27212 Hi, I am trying to simulate a circuit with the UCC27212. However, when I start the simulation I get the warnings: WARNING(ORPSIM-15256): <X_U2.X_DRIVER_3.X_U1.DELAY> not a subcircuit param WARNING(ORPSIM-15256): <X_U2.X_DRIVER_3…
Part Number: UCC27212 Hello, Our customer has some questions about UCC27212.
1. When UVLO condition occurs for either VDD or HB, does it recover after removing UVLO condition? Or is it latched off?
2. The below figures about UVLO come from page 11 of the…
Part Number: UCC27212 Hello,
the chapters 10.2 and 10.2.1 need to be changed. Both chapters are referring to a 8 pin device. the UCC27212 is a 10 pin device (WSON 10 pin).
Thanks, Heiko
Part Number: UCC27212 Other Parts Discussed in Thread: SM72295 Dears
One of my customer want to know if we have Integrated full bridge gate driver for Power and Motor driver?
Thanks
Jun Shen
Part Number: UCC27212 Hello!
I have some question about information in your datasheet for device UCC27212.
According to information on page 7, test conditions for peak pulldown current are: VLO=12V for VDD=6.8V.
How is it possible?
Moreover, we have some…
Part Number: UCC27212 Good day!
I have some question about information in your datasheet for device UCC27212 .
Datasheet provides some information about dynamic parameters on pages 7-8 (cf. section 6.6 "Switching characteristics").
According…
Part Number: UCC27212 Other Parts Discussed in Thread: UCC27284 Hello,
Our customer has some questions about our gate driver ICs.
Due to their board layout issue, they are going to use UCC27212 for their 1 st prototype. Then they will change it to UCC27284…