Hi Zhang,
The voltage(VCC_laser) that needs to be supplied to SPL PL90_3 and UCC27321 can be either 15V, provided externally, or 5V, provided through the launchpad. This can be selected via connector J2 with a jumper.
The voltage on laser_on will…
Hi Bob,
Thanks for asking about ucc2751x, sorry but there is no SOIC package for this family. For high speed single channel SOIC I recommend using UCC27531 or for higher speed at the cost of more delay UCC27321/2.
Please let me know if you still…
Hello Tim,
The parts could have originated from Unitrode. UCC27322DR also continued to be marked with the unitrode markings for some time after being acquired by TI. 1B is a two digit date code corresponding to year and month. Assuming B mean the second…
Part Number: TIDA-00663 Other Parts Discussed in Thread: ENERGIA , UCC27321 Tool/software: TI C/C++ Compiler Hello all,
I'm using the MSP430F5529LP to generate pulses with width in the nanosecond order. I've implemented the following code in Energia…
Other Parts Discussed in Thread: UCC3895 , UCC28950 , UCC27321 , UCC37321 HI everyone!
I am going to develop DC/ DC 600v to 30Kv 100kw step up converter for some science project.
Actually I am newbie in ZVS/ZCS technology, what kind of controller…
Part Number: TIDA-00663 Other Parts Discussed in Thread: TINA-TI , , ENERGIA , UCC27321 , SN74LVC2G14 , TDC7200EVM Tool/software: TINA-TI or Spice Models Hello all,
I've recently started working on implementing TIDA-00663 LiDAR reference design and…
Hey Chase,
Thank you for reaching out to TI with your questions regarding the UCC27519A-Q1.
Please see the attached Schematic Review Template for reference.
3364.UCC27518_9 Schematic Review Template.xlsx
Here are a few notes:
1. The EN pin can…
Scott,
The TPS40210 by it self is not going to have enough driver strength to effectively drive a 750mA output at 110V from a 11V input. The TPS40210's driver is limited to 500mA gate drive current and a 200V MOSFET capable of handling the more…
