Part Number: UCC27524A1-Q1 Tool/software: Hi team,
The Operating Junction Temperature Range has been changed to 140°C to 150°C, but the Op Temp in the package information remains at a maximum of 140°C.
Which is correct?
Best regrds,
Part Number: UCC27524A1-Q1 Dear team,
When my customer use RθJC(top) listed in our datasheet to calculate Tj, Tj will be larger than 150C, so they hope we can help evaluate the actual RθJC(top) value based on their dissipation model as below. They add…
Part Number: UCC27524A1-Q1 Hi team:
Q1:We have test the current from OUTA of UCC27524A1-Q1. As shown in the following figure,the voltage of the 1ohm resistance was measured of which the value is equal to the output current.The peak value is 0.438A,could…
Part Number: UCC27524A1-Q1 Hi
The customer uses this driver, and there is a waveform jitter in the driving voltage. The control signal is a 50% duty cycle square wave of 160KHz. Please refer to the attached MOS transistor data manual。 Infineon-IPW65R050CFD7A…
Part Number: UCC27524A1-Q1 Other Parts Discussed in Thread: DRV8245-Q1 Hi Team,
There is a good new that Customer is searching TI solution
Do we have a product that can compete with "VNQ7050AJTR" ?
https://www.st.com/resource/en/datasheet/vnq7050aj…
Part Number: UCC27524A1-Q1 Hi team,
My customer refer to this post, and he wants to know :
1,What affect does the PI coating have on the part ( UCC27524A1-Q1) ? What aspect of the part does it improve (performance, quality, reliability, durability…
Part Number: UCC27524A1-Q1 Hello Mamadou-san
Thanks for the clear answer. I think it is very useful advice for application design.
By the way, my customer wants to hear the input capacitance value of the IC's INA and INB pins. Although it is not written…
Part Number: UCC27524A1-Q1 Hello
My customer connects UCC27524A1-Q1 INA and INB and uses two drivers in parallel.
8.3.6 of the data sheet states that dV / dt must be greater than 20V / us. How many ohms can the series resistor put into the input circuit…
Part Number: UCC27524A1-Q1 Hi team,
Which current does "500-mA reverse current without either damage", which is written in its datasheet "8.3.4 Output Stage", mention and why should this limitation be considered?
UCC27524A1-Q1 could sink and source…