Part Number: UCC27624 Tool/software: Hi All,
I have a question about the UCC27624.
I noticed smoke coming from near the VDD pin when powered on. VDD=24V. Could there be any reason for this damage?
The connection of the OUTA pin is unknown, so…
Part Number: UCC27624-Q1
Tool/software:
Hi Team,
I am using UCC27624QDRQ1 in one of our design.
In the reference EVK design of UCC27624QDRQ1 they have used 1.8nF capacitor and a Schottky diode at the gate side. May I know for what purpose these…
Part Number: UCC25600 Other Parts Discussed in Thread: UCC27624 Hi team,
My customer wants to use UCC25600 to design power supply.
As you can see, there are two DC-ISO capacitors C21 and C25 in UCC25600's reference design.
Q1: Can we remove C21…
Part Number: UCC27624 Tool/software: Hi team,
We are Using UCC27624 drive transformer, the ratio of the primary and secondary turns of the transformer is 1:2, and 0.1A electronic load is loaded on the secondary side, and the heating UCC27624 is serious…
Part Number: UCC27624 Tool/software: In our design, we are using the MOSFET Driver IC to drive both P and N MOSFETs. The Enable inputs (ENA and ENB) are driven with a +3.3V signal, while the IC’s supply voltage is 24V. From the datasheet, I noticed that…
Part Number: UCC27624-Q1 Other Parts Discussed in Thread: UCC27614 Tool/software: Dear Experts,
One of the channels of the UCC27624-Q1 will be unused for our project.
For the input I understand it can be tied to ground but the output can I leave it…
Part Number: UCC27624 Other Parts Discussed in Thread: UCC27710 Tool/software: Hi sir,
What's TI P2P solution with FAN7387MX
https://www.mouser.tw/ProductDetail/onsemi-Fairchild/FAN7387MX?qs=1WK3E8%252B1vGBvVy197UlNpA%3D%3D&srsltid=AfmBOoqjAC8l1HwwDkC…
Part Number: UCC27624 Tool/software: Hi team,
When ENx is disabled, does OUTx get driven low? Or is it weakly pulled down? I'd like to pull up OUTx when disabled. I'd like to know if this is possible.
Best regards,
