Part Number: UCC2802-EP Other Parts Discussed in Thread: UCC2803 Tool/software: Hello Prathik,
As suggested the application note , https://www.ti.com/lit/an/slva662/slva662.pdf?ts=1754249520215&ref_url=https%253A%252F%252Fwww.google.com%252F is referred…
Part Number: UCC2802-EP Tool/software: Hello,
Turn on threshold for UVLO ranges from 11.5V to 13.5V where as VCC maximum voltage is 12V. In this case :
1.How will the turn ON threshold work here?
2. If Zener clamps to 12V then if turn on threshold…
Part Number: UCC2802
If X-ray test can also done at these industrial parts？
Test item difference due to different test platform？
Any automotive parts in production with wire diameter change from 1.3 Mil Au -> 0.96 Mil Cu implemented?
Lifetime…
Part Number: UCC2802
If X-ray test can also done at these industrial parts?
Test item difference due to different test platform?
Any automotive parts in production with wire diameter change from 1.3 Mil Au -> 0.96 Mil Cu implemented?
Lifetime…
Part Number: UCC2802 Hi Team,
At page 3 of the datasheet, the temperature range of D packages is -40C to 125C but at page 42 the UCC2802DTR (D package) is rated at -40C to 85C. Can you please confirm which is correct?
Regards,
Danilo
Part Number: UCC2802-Q1 Hi Team,
We are penetrating our ucc2802-q1 at my customer side, we got question from customer that what is the absolute maximum voltage on OUT pin(Pin 6 as below):
As we can't find it in datasheet, but it's important for…
Part Number: UCC2802 Hallo together,
I want to know if it is allowed to supply the UCC2802 with 15V current limited by a 100 Ohm resistor so that I can directly supply a SiC-Mosfet with the
15V-output of the PWM-output. In the datasheet it is written…
Part Number: UCC2808-1 I think there is an error in the block diagram. There are two comparators tied to the Softstart line. One has threshold of VDD-1V but the softstart spec on pg 5 says the SS range is 0.5V to 4.0V. What is the correct threshold?
Part Number: UCC2802 In the UCC2802 D/S, it says the absolute max. VCC rating is 12V. However, the turn-on threshold of the UCC2802 is 12.5V,typ. It looks it's not making sensing, right?
and When supply voltage is higher than 12.5V, what happened? Being…
