Part Number: UCC28610EVM-474 Other Parts Discussed in Thread: UCC28610 We want to use the enable function on the UCC28610. We have experimented with shorting the MOT pin to ground, and indeed the converter shuts down. But the problem is, that on the 12V…
Part Number: UCC28610EVM-474 I am a student on the CSU FSAE team for which we need a high voltage to 12V converter for our current designed car. The UCC28610evm-474 seems like it would do the job for me. Where do I go to get an evaluation board? Technical…
Hello Vincent,
The UCC28610 after it has detected a ZCD pin crossing zero it will wait 400 ns and then turns on the gate drive. This is not true valley detection.
The waveform that you are observing is similar to figure 12 of the UCC28610EVM-474…
David,
I just have the oscope GNG probe touched to the C7's terminal connected to the ground, ie pin 4 of UCC28711, nowhere else. The same problem happened on UCC28610EVM-474 when I place the oscope GND probe on the TP4.
Thanks
Other Parts Discussed in Thread: UCC28610EVM-474 , UCC28610 , TL431 I am using UCC28610EVM-474. The o/p voltage is 12V but I need 12.6V. Can we change o/p voltage by some method.
Other Parts Discussed in Thread: UCC28610 , UCC28610EVM-474 Hi Team,
Could someone can tell me that how to got the EVM's transformer specification either UCC28610 or other isolation controller?
Your any supporting is appreciated for me.
