Part Number: UCD3138A64 I thought I had posted this last night, but I do not see it in the forum. My apologies if this is a duplicate.
I am trying to operate EADC1 in SAR mode, but the EADCVALUE register is always 0.
I am operating DPWM0 at 200KHz to trigger…
Part Number: UCD3138A64 Other Parts Discussed in Thread: UCD3138 I am having a problem using the UCD3138 GUI.
After I download the Lab1 code and make sure the program is running ("DEVICE ID" finds device), all of the tools on the "Debug" tab ("Memory Debugger…
Part Number: UCD3138A64 I'm trying to implement a dual active bridge controller with the UCD3138A64. I'm starting simple with a DPWM0 and 1 driving the primary side FETs with 50% duty cycle (a little less with dead time) and DPWM2 and 3 driving the…
Part Number: UCD3138A64 Hi,
i view an problem link to memory of UCD3138A64: I build the project LLCHBFirmware-1.2 and the memory of program is higher the Pflash of UCD3138A64. The firmware wasn't change from orginal firmware (download from TI site).…
Part Number: UCD3138A64 Other Parts Discussed in Thread: UCD3138 Hi,
I have compilated the LLCHBFirmware-1.2 to UCD3138A64 but i have two errors: #10010 and #10099D . The firmware wasn't changed from original. I adjusted the Designated code state from…
Part Number: UCD3138A64 Hi team,
Here is a confusing items about UCC3138A64: how to set PIN47 to be a I/O function.
but this pin has two alternative assisgnment TCAP0 and TCAP1.
could you give a example code how to reuse this pin as both TCAP1 and I…
Part Number: UCD3138A64 Other Parts Discussed in Thread: UCD3138A Hi Sir:
for UCD3138A, in 5.1 Absolute Maximum Ratings, input voltage for all pins, 3.8V MAX; while in 5.5 Electrical Characteristics, MAX VOLTAGE for EAP-AGND is 1.998V, EAP-EAN 1.848V, Measurement…
Part Number: UCD3138A64 Hi,
i'm making new schematic with UCD3138A64 but i have an doubt that is: the pins not used could pull-down to GND? In the datasheet there isn't value or pull-up resistor specification.
Thank you for your answer.
Best Regards…
Part Number: UCD3138A64 Tool/software: Code Composer Studio Hi every one, i am using UCD3138A64 to power conversion designer has designed when the input voltage between 12vdc to 75vdc output should be 12v dc how to do this could any one tell me solution…