Part Number: UCD9090A Hi,
I can see from the datasheet that there is flash memory in this device, at the very least. Are there also other memory types - SRAM, for example? For my application and customer, I need to know exactly the type and amount of…
Part Number: UCD9090A Other Parts Discussed in Thread: UCD9090 Hello expert,
we would like to know the effort to replace UCD9090 with UCD9090A. I checked on other post and found out that code should be different, also some improvement from App note -…
Part Number: UCD9090-Q1 Other Parts Discussed in Thread: UCD9090A , , UCD9090 Team,
is there any difference between UCD9090-Q1 and UCD9090A? (specifically between UCD9090QRGZRQ1 and UCD9090ARGZT)
I would like to double check since the non-Q1 version has an…
Part Number: UCD9090A The problem is it is reading back wrong address from Digital fusion tool, we have set the address to 65 (Dec), different power cycles it gives different addresses, the set resistor values are correct. This is not a new design it is…
Part Number: UCD9090A Hi
We would like to implement a resequence event based on a logic level change, and a timeout period.
For example:
SoC sets gpio connected to ucd9090a from low to high.
UCD 9090a starts a timer.
If the SoC does not set this pin…
Part Number: UCD9090A Other Parts Discussed in Thread: UCD9240 , Hello,
Could you confirm that the UCD9090A is manufactured with the chip of the UCD9240 ?
Best regards,
Denis GALLARDO
Part Number: UCD9090A Hi Team,
In GUI, can I extract the raw register values?
The voltage on VOUTn pin will appear in GUI in a graph. I'm wondering if the raw ADC output value in digital code also can be extracted in GUI.
Otherwise, do we have…
Part Number: UCD9090A Here is my UCD9090A setting for system monitor and sequence. I want UCD reseqence if any power rail fail on system working or system power on.
But I just confirm fault respone for power rail fail and resquence setting works. It still…
Part Number: UCD9090A working to implement the UCD9090A in a design. The I2C bus allows multiple address selections. If I pick 66, is this 01100110 0x66h for write and 01100111 0x67h for read, or 11001100 0xCCh for write and 11001101 0xCDh for read? The…