Part Number: UCD9224EVM-464 Tool/software: Hi! I purchased this evaluation module and the USB interface. The evaluation module seems to be working fine. I now want to create a new design with different voltages. Is there some documentation that can walk…
Part Number: UCD9224EVM-464 Other Parts Discussed in Thread: UCD9224 Tool/software: Hi! I purchased this evaluation module and the USB interface. The evaluation module seems to be working fine. I now want to create a new design with different voltages…
Other Parts Discussed in Thread: UCD9224EVM-464
Dear Forum,
I'm evaluating the UCD9224EVM-464 and comunicating it with the USB Interface Adapter.
It is connected to 12.1 Volts @1A no loads on Vout's . The Voltages on both POL's are regulated to…
Hi Chris,
Sorry for the late answer.
I made the calibration above for all the rails and I have a good correlation between the load and the GUI.
I've tried it for an other board but the calibration were complitly different.
I suspect a board schematic…
Good morning Zhiyuan Hu,
I am planning to get one ucd9224evm-464. Is this board supplied with USB to GPIO to connect with the computer and work on it using FUSION ?
Thanks,
Pawan Ghotikar
Other Parts Discussed in Thread: UCD9224EVM-464 , UCD9224 Hi,
I'm testing the Eval-Board UCD9224EVM-464 and I have a problem to startup the Fusion Design GUI.
At the beginning it worked fine. I connected the Eval-Board to my PC with the USB Interface…
have done all of you suggestions to no avail The resistor values and connections I took out of your sluu443.pdf (User's Guide for the UCD9224EVM-464),
with ADDR-0 and ADDR-1 to pins 77 and 76, respectively, on the 9248. Currently, the jumpers are removed…
