Part Number: ULN2002A Hi All,
LM3046MX/NOPB was not listed.
Instead, I posted about the ULN2002A transistor array product.
I have a question about LM3046MX/NOPB.
I'm looking for a TI product to replace the LM3046MX/NOPB, but I couldn't find…
Part Number: ULN2003A
I am using C2000 DSP but for some reason, I need 5/24V 500mA Output IO port. Can I use ULN2003/2004 as below to increase the current and voltage?
Part Number: LP395 Other Parts Discussed in Thread: ULN2002A Tool/software: Hello There,
I have been trying to get some CMOS technology type GPIO pins working for a DM332T driver from omc-stepperonline.com.
The issue is that the current from the…
Shunsuke-san,
Find attached the Q revision for reference only. Do not that the latest version of the datasheet should be used for the most accurate and up-to-date design information.
slrs027q.pdf
Best Regards, Tim
Hi Daniele,
For inputs voltage that large, I would recommend the ULN2002A which is pin to pin compatible and is functionally similar to ULN2003A.
The input on ULN2002A should be driven with voltages ranging from 14V to 24V.
Do note that 30V…
Hi Maverick,
This input voltage is defined for the input pins namely 1B to 8B.
A 3.3V to 5V input will sufficiently turn on and turn off the device even when the input collector emitter voltage is up to its Abs max (50V).
It should not change…
Part Number: OPA134 Other Parts Discussed in Thread: LM386 , , ULN2004A , ULN2002A , ULN2003A , LM4871 I am creating a device that vibrates the 6 strings of a guitar. Let me explain what I have working, then let me explain why I need something better…
Hi Sravya,
Attached is the C2000 PCB design guide PDF and very good to review even if you are an avid PCB designer.
Regards,
TI-F2800x Hardware Design Guidelines for TMS320F28xx and.pdf
Hi Cedric,
Nope no firmware is required to establish the connection with emulator. You can once go through: F28335 controlCARD ZJZ Schematic [R2.2].pdf
Also, here are hardware guidelines:
Hardware Design Guidelines.pdf
Regards,
Gautam
