Part Number: WILINK-BT_WIFI-WIRELESS_TOOLS Hi BLE team,
I'm using the BlueTooth Logger tool, and was wondering what the ! on the left side of the tool means? I could not find information in the Logger Tools User Guide: https://www.ti.com/lit/ug/swau058d…
I believe the INI file will only let you lower the TX Power. There may not be a way to fully disable a specific channel other than changing the country code (i.e only use channels 1-13 instead of 1-14), but will look into it.
I recommend you…
Part Number: WILINK-BT_WIFI-WIRELESS_TOOLS Hi,
Does command Send_HCI_Set_AFH_Host_Channel_Classification support with Wilink 6 BT with normal status???
if so. how to use it properly??
Does it send after BT bring up or connected ??
Part Number: WILINK-BT_WIFI-WIRELESS_TOOLS Hi Team,
My customer would like to ask if he needs to maintain the wired connection to the device under test (from a PC) at all times while running a test? Or can the DUT be configured via HCITester…
Could you change the interrupt type to rising edge? I wonder if the interrupt was being missed and caused the initial issue. It doesn't explain why the IRQ stays high after WL_EN toggle, however.
These are the software debug tools:
Hard to analyze just from the trace.
It does print that invoking schedule scan stop command fails.
Would it be possible to fetch the firmware log?
WL_UART_DBG pin is used via a level shifter and the tool is called gLogger and can be found as part…