Hello Thomas,
It seems as though you would need to use the Server library to use this API. Unfortunately, we cant provide source code for you to include the api to the client library which would require a rebuild of the distribution. I see 2 paths forward…
Part Number: WL1835MOD Tool/software: Hello TI,
I want to log the data stream between Bluetopia PM and the hardware. I can I do that?
I tried with this snipped in my app but do not get any output:
static int SetBluetoothDebug()
{
char* filename…
Part Number: WL1835MOD
I've seen a few other posts regarding this but no certification was attached. Would someone be able to provide the Anatel certification for this module? From the datasheet it appears that it is only FCC, IC, ETSI/CE, and TELEC…
Part Number: WL1835MOD Hi,
Can you please answer the following query?
If we add the interferer with 100% duty cycle in operating channel, still the SSID broadcast is happens ?
Thanks,
Naresh
Part Number: WL1835MOD Hi,
We are trying to perform RX BER meter test for BLE.
But we are achieving the 50 percentage of bit error rate in the result. To run this test we configured wlink8 as a receiver and spectrum analyzer as a transmitter. The following…
Part Number: WL1835MOD Other Parts Discussed in Thread: WL1835 , , WL1837 Hi, I have wifi module - wl1835
Software details
kernel version - 5.10.35
1) where can I find release notes for wl1835 firmware version -8.9.0.0.90?
2) does firmware version 8.9.0…
Hi Bernd,
So the difference between TIInit_11.8.32-BT4.2.bts and TIInit_11.8.32.bts changes what bt spec is supported.
TIInit_11.8.32.bts has an add on that changes the version to support 5.1 and that version needs to match the 5.1 Bluetopia SDK
(This…
Part Number: WL1835MOD
Hi,
As part of emission testing, we have a requirement to control the duty cycle on WL1835MOD.
Can you please help us to share the commands that can be set the duty cycle=30%
Thanks in Advance.
Regards,
Naresh
Hi Dien,
Sorry for the delay. We don't have an example to connect the cc33xx device to the raspberry pi. You would need to work with the raspberry pi forums to enable SDIO in DTS.
Part Number: WL1835MOD My question is about conformity product.
My company want to use a antenna from Laired : EFB2455A3S-25MHF1 PIFA (250mm) in association with a texas instrument module WL1835MODGB. Do you know if we in this configuration keep the FCC…