Search tips
Showing 1,298 results View by: Thread Post Sort by
    Answered

  • WL1837MOD: WL1837MOD: Bluetopia stack - HCI DRIVER ERROR

    Resolved
    Part Number: WL1837MOD Other Parts Discussed in Thread: WL1837 As per: https://e2e.ti.com/support/wireless-connectivity/wi-fi-group/wifi/f/wi-fi-forum/973741/wl1837mod-bluetopia-stack/3598125 We continue to experience issues in using the last supporte…
    • Resolved

  • RE: WL1837MOD: WL1837MOD

    Hi Sergey, Sorry for the delay. As Saurabh said, we really can't comment and provide much support on XID LLC.

  • RE: WL1837MOD: How should I do for modifing the baud rate of uart between wl1837mod and am3352?

    Hi Yunxue, Yunxue Wang said: ★★I want to know whether the 90ms interval between two consecutive packets of data is internally configurable in wl1837mod, or is it caused by the PC sending it to wl1837mod? I believe this is caused by the PC sending it to…

  • RE: WL1837MOD: Wifi link recovery

    Hi Stefano, We have never tried disabling basic rates at our end and are not able to comment much on how we can achieve this. I see you are trying to modify the hostapd.conf to disable certain rates on AP side. You may confirm that by checking the beacon…

  • WL1837MOD: Bluetooth: hci0 killing stalled connection xx

    Part Number: WL1837MOD Other Parts Discussed in Thread: WL1837 , Dear On the hardware of our equipment, uart1 is connected to wl1837mod, and UART2 is connected to other equipment. When wl1837 is run alone, uart1 acts normally, and when UART2 is run alone…

  • WL1837MOD: Reassociation request takes too long

    Part Number: WL1837MOD Hello! We are using WL1837MOD. And we notice that sending re-association request takes rather long. CPU: armv7l Kernel: 5.4.47 wlcore: PHY firmware version: Rev 8.2.0.0.245 wlcore: firmware booted (Rev 8.9.0.0.86) We are also using wpa_supplicant…

  • WL1835MOD: side effects of WL1837MOD wlconf config applied by mistake

    TI Thinks Resolved
    Part Number: WL1835MOD Other Parts Discussed in Thread: WL1837MOD Hi Guys, I am currently resolving an issue where we noticed that a small batch of devices that we shipped to customers that were using the WL1835MOD module had a WL1837MOD wl18xx-conf.bin…

  • RE: WL1837MOD: Spurious emission (Rx) test failure during Korean RE testing

    Hi Sudar, Could you please share a snapshot of the RTTT GUI when you are observing the -53.08 dB spur? BR, Seong
    • Answered

  • WL1837MOD: WL1837MOD

    Resolved
    Part Number: WL1837MOD Trond Sandvik Hi Trond, Could you help share the link of SDMA firmware link that you upgraded mentioned in below link? I run into the identical issue in IMX7D UART. Thanks in advance! https://e2e.ti.com/support/wireless-connectivity…
    • Resolved
    • Answered

  • WL1837MOD: RTTT cannot be connected

    Resolved
    Part Number: WL1837MOD Hi, My customer is struggling to connect RTTT to WL1837MOD. - Windows PC with FTDI cable is setup (COM port and serial configuration are OK) - WL_RS232_RX(pin#26), WL_RS232_TX(pin#27) are connected to FTDI cable(1.8V ). (customer refers…
    • Resolved

Didn't find what you are looking for? Post a new question.